Additions To Reference Chart For Major Production Changes
Usage:
The article "Reference Chart For Major Production Changes On 3208 Truck Engines, " in the Truck Engines News dated November 13, 1981, has a list of articles that announced major changes to these engines. The articles in the chart that follows are additions to the earlier reference chart. Make a note of this new information in the earlier Truck Engine News.
Caterpillar Information System:
1983/04/13 Fabricated Bracket Decreases Stress On Refrigerant Compressor Bracket
1983/04/13 New Shutoff Solenoid Group Used
1983/04/13 New Turbocharger Inlet Tube Assembly And New Seal Available
1983/04/13 New Manual Brakesaver Control Group
1983/04/13 Improved Valve Springs Available
1983/03/02 Change Made To 6V3032 Deluxe Test Lead Kit
1983/03/02 Low Manifold Pressure: New Gasket Prevents Air Leakage At Aftercooler
1983/03/02 Parts Service Information For Pistons
1983/03/02 New Instruction Decal Used On 6V4060 Engine Set Point Indicator
1983/03/02 Fabricated Fixture Permits Easier Inspection Of Fuel Injection Nozzles
1983/03/02 Check Cylinder Bores For Chamfer During Reconditioning
1983/03/02 New Piston Group Has A Thicker Top Ring
1983/04/13 Oil Passage Plugs Are No Longer Installed In Crankshaft For Parts Service
1983/04/13 Use FT1783 Fixture To Drill Vent Holes In Impeller
1983/04/13 Use The 6V5000 Infrared Thermometer Group To Measure Temperatures
1983/04/13 List Of Service Publications
1983/04/13 New Connecting Rod Bearings Used
1983/05/18 New Specification For Clearance Between Fuel Rack Slot And Cross Link
1983/05/18 New Fuel Nozzle Adapters Used
1983/05/18 New Gasket And Cover Used On Governors
1983/05/18 Eight Good Reasons To Convert Your 3406 Truck Engine From Pc To Di At Overhaul Time{1250,1000}
1983/05/18 New Fuel Setting Information
1983/05/18 New Specification For Adjustment Of Jacobs Engine Brake
1983/05/18 Installation Of Bearing For Connecting Rod Piston Pin