1983/04/13 Caterpillar


New Manual Brakesaver Control Group

Usage:


3408 Truck Engines

Description of Change: A new manual Brake-Saver control group is available for 3408 Truck Engines. The new group operates on 380 kPa (55 psi) air pressure at the control valve. The former group operated on 345 kPa (50 psi) air pressure. The increased pressure will give better operation of the BrakeSaver on these engines.

Adaptable As: The new 9N2642 Control Group is a direct replacement for the former 9N574 Control Group in this application. The 9N574 Control Group is still used with the 3406 Truck Engine.

Caterpillar Information System:

1983/04/13 Improved Valve Springs Available
1983/03/02 Change Made To 6V3032 Deluxe Test Lead Kit
1983/03/02 Low Manifold Pressure: New Gasket Prevents Air Leakage At Aftercooler
1983/03/02 Parts Service Information For Pistons
1983/03/02 New Instruction Decal Used On 6V4060 Engine Set Point Indicator
1983/03/02 Fabricated Fixture Permits Easier Inspection Of Fuel Injection Nozzles
1983/03/02 Check Cylinder Bores For Chamfer During Reconditioning
1983/03/02 New Piston Group Has A Thicker Top Ring
1983/03/02 Engine Valve Stem "use Again " Specifications
1983/03/02 Water Pump Impellers Can Be Reconditioned
1983/03/02 Special Instruction Available For "Troubleshooting And Repair Of The 6V32100 Multitach"
1983/03/02 New Water Pump Has Improved Seal
1983/04/13 New Turbocharger Inlet Tube Assembly And New Seal Available
1983/04/13 New Shutoff Solenoid Group Used
1983/04/13 Fabricated Bracket Decreases Stress On Refrigerant Compressor Bracket
1983/04/13 Additions To Reference Chart For Major Production Changes
1983/04/13 Oil Passage Plugs Are No Longer Installed In Crankshaft For Parts Service
1983/04/13 Use FT1783 Fixture To Drill Vent Holes In Impeller
1983/04/13 Use The 6V5000 Infrared Thermometer Group To Measure Temperatures
1983/04/13 List Of Service Publications
1983/04/13 New Connecting Rod Bearings Used
1983/05/18 New Specification For Clearance Between Fuel Rack Slot And Cross Link
1983/05/18 New Fuel Nozzle Adapters Used
1983/05/18 New Gasket And Cover Used On Governors
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.