Change Made To 6V3032 Deluxe Test Lead Kit
Usage:
Caterpillar Information System:
1983/03/02 Low Manifold Pressure: New Gasket Prevents Air Leakage At Aftercooler
1983/03/02 Parts Service Information For Pistons
1983/03/02 New Instruction Decal Used On 6V4060 Engine Set Point Indicator
1983/03/02 Fabricated Fixture Permits Easier Inspection Of Fuel Injection Nozzles
1983/03/02 Check Cylinder Bores For Chamfer During Reconditioning
1983/03/02 New Piston Group Has A Thicker Top Ring
1983/03/02 Engine Valve Stem "use Again " Specifications
1983/03/02 Water Pump Impellers Can Be Reconditioned
1983/03/02 Special Instruction Available For "Troubleshooting And Repair Of The 6V32100 Multitach"
1983/03/02 New Water Pump Has Improved Seal
1983/01/26 New Piston Design
1983/01/26 New Crankshaft Assemblies
1983/04/13 Improved Valve Springs Available
1983/04/13 New Manual Brakesaver Control Group
1983/04/13 New Turbocharger Inlet Tube Assembly And New Seal Available
1983/04/13 New Shutoff Solenoid Group Used
1983/04/13 Fabricated Bracket Decreases Stress On Refrigerant Compressor Bracket
1983/04/13 Additions To Reference Chart For Major Production Changes
1983/04/13 Oil Passage Plugs Are No Longer Installed In Crankshaft For Parts Service
1983/04/13 Use FT1783 Fixture To Drill Vent Holes In Impeller
1983/04/13 Use The 6V5000 Infrared Thermometer Group To Measure Temperatures
1983/04/13 List Of Service Publications
1983/04/13 New Connecting Rod Bearings Used
1983/05/18 New Specification For Clearance Between Fuel Rack Slot And Cross Link