List Of Service Publications
Usage:
This service information has become available since the last list published in the December 8, 1982 issue of Truck Engine News. These forms can be ordered from your Caterpillar dealer to keep reference information current.
Caterpillar Information System:
1983/01/26 Spring Seat Enlarger Available For Use On Cylinder Heads
1983/01/26 Parts Service Information For Pistons And Rings
1983/01/26 Oil Filter Removal
1983/01/26 Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1983/01/26 Changes In Engine Rpm; Governor Does Not Operate Correctly
1983/01/26 Improved Cylinder Head Gasket
1983/01/26 Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/26 Crankshaft Has Step At Front Of No. 1 Main Bearing Journal
1983/01/26 Change In Repair Centers For 5P2160 Horsepower Meter Group
1982/12/08 Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/08 Power Analysis Report (PAR) Available At More Dealers
1982/12/08 Use 6V6147 Polishing Wheel To Clean Piston Pins
1983/01/26 New Crankshaft Assemblies
1983/01/26 New Piston Design
1983/03/02 New Water Pump Has Improved Seal
1983/03/02 Special Instruction Available For "Troubleshooting And Repair Of The 6V32100 Multitach"
1983/03/02 Water Pump Impellers Can Be Reconditioned
1983/03/02 Engine Valve Stem "use Again " Specifications
1983/03/02 New Piston Group Has A Thicker Top Ring
1983/03/02 Check Cylinder Bores For Chamfer During Reconditioning
1983/03/02 Fabricated Fixture Permits Easier Inspection Of Fuel Injection Nozzles
1983/03/02 New Instruction Decal Used On 6V4060 Engine Set Point Indicator
1983/03/02 Parts Service Information For Pistons
1983/03/02 Low Manifold Pressure: New Gasket Prevents Air Leakage At Aftercooler