6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
Usage:
All 3306 Truck Engines
New 6V6175 and 6V6176 Torque Adapters are now available. These adapters are bolted to the fuel pump drive gear. This makes it possible to put a specific torque on the gear with a torque wrench while the bolt in the center is tightened to the correct torque specification.
The 6V6176, which is a replacement for the FT1650 Adapter, is used for engines with automatic timing advance. The 6V6175 is a replacement for the FT1644 Adapter and is used on engines without automatic timing advance.
Caterpillar Information System:
1982/12/08 List Of Service Publications
1982/12/08 Resurfaced Cylinder Blocks And Heads
1982/12/08 6V4869 Adapter And 6V6174 Plug Can Be Used To Install Camshaft Bearings
1982/12/08 New Crankshaft Seal Groups Used
1982/12/08 Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08 6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves
1982/12/08 New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08 New Seal Used On Governor Control Shaft
1982/12/08 Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/10/27 Changes In Engine Rpm; Governor Does Not Operate Correctly
1982/10/27 Bulged Capsule-type Fuel Nozzles
1982/10/27 Additional 3208 Remanufactured Truck Engines Available
1982/12/08 Improvements Made To Fuel Ratio Control
1982/12/08 Removal Of Hydraulic Override From Fuel Ratio Control
1982/12/08 Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/12/08 Power Analysis Report (PAR) Available At More Dealers
1982/12/08 Use FT1711 Light Table For Cylinder Liner Inspection
1983/01/26 Change In Repair Centers For 5P2160 Horsepower Meter Group
1983/01/26 Crankshaft Has Step At Front Of No. 1 Main Bearing Journal
1983/01/26 Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/26 Improved Cylinder Head Gasket
1983/01/26 Changes In Engine Rpm; Governor Does Not Operate Correctly
1983/01/26 Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1983/01/26 Oil Filter Removal