Service Parts Available For The 5P4150 Nozzle Testing Group
Usage:
Service parts needed for the 5P4150 Nozzle Testing Group are available. They are listed in Special Instruction "Use of 5P4150 Nozzle Testing Group and 8S2245 Nozzle Cleaning Kit ", Form SEHS7292. The parts list included in the next revision of this Special Instruction includes both Caterpillar part numbers and supplier part numbers. Supplier part numbers listed in the Special Instruction are available from:
Owatonna, MN 55060
U.S.A.
Phone: 507-451-5860
Telex No.: 29-0876
Cable Address: TOOLCO
Caterpillar Information System:
1982/12/08 6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves
1982/12/08 New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08 New Seal Used On Governor Control Shaft
1982/12/08 Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/10/27 Changes In Engine Rpm; Governor Does Not Operate Correctly
1982/10/27 Bulged Capsule-type Fuel Nozzles
1982/10/27 Additional 3208 Remanufactured Truck Engines Available
1982/10/27 New Fuel Nozzle Test Sheet Available
1982/10/27 Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter
1982/10/27 Wider Crankshaft Gear Used
1982/10/27 New Oil Additives Can Cause High Copper (cu) Indications During S.o.s. Tests
1982/10/27 Dial Bore Gauge And Size Setting Fixture Available
1982/12/08 New Crankshaft Seal Groups Used
1982/12/08 6V4869 Adapter And 6V6174 Plug Can Be Used To Install Camshaft Bearings
1982/12/08 Resurfaced Cylinder Blocks And Heads
1982/12/08 List Of Service Publications
1982/12/08 6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/12/08 Improvements Made To Fuel Ratio Control
1982/12/08 Removal Of Hydraulic Override From Fuel Ratio Control
1982/12/08 Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/12/08 Power Analysis Report (PAR) Available At More Dealers
1982/12/08 Use FT1711 Light Table For Cylinder Liner Inspection
1983/01/26 Change In Repair Centers For 5P2160 Horsepower Meter Group
1983/01/26 Crankshaft Has Step At Front Of No. 1 Main Bearing Journal