1982/10/27 Caterpillar


Additional 3208 Remanufactured Truck Engines Available

Usage:


Three new part numbers for 3208 Remanufactured Truck Engines are now available. These engines are similar to and can be adapted to the applications where the original engine arrangements were used. With the addition of these new engines it is now possible to use a remanufactured engine in most applications where 3208 Truck Engines are used. These new engine part numbers are shown in Chart A.

Also, the Special Instruction for the conversion of a number has now been divided into separate Special Instructions for each remanufactured engine part number. These are shown in Chart B.

Caterpillar Information System:

1982/10/27 New Fuel Nozzle Test Sheet Available
1982/10/27 Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter
1982/10/27 Wider Crankshaft Gear Used
1982/10/27 New Oil Additives Can Cause High Copper (cu) Indications During S.o.s. Tests
1982/10/27 Dial Bore Gauge And Size Setting Fixture Available
1982/10/27 Indications From 6V3100 Timing Indicator Group Must Be Corrected For Some Applications
1982/10/27 Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/27 Engine Slobbering; New Piston And Rings Used
1982/10/27 New Fasteners Used For Fuel Injection Lines
1982/10/27 Extended Storage Procedures
1982/10/27 Field Conversion Procedure For Epa Certified On-highway Truck And On-highway Vehicle Engines
1982/10/27 Cold Weather Engine Operation
1982/10/27 Bulged Capsule-type Fuel Nozzles
1982/10/27 Changes In Engine Rpm; Governor Does Not Operate Correctly
1982/12/08 Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/08 New Seal Used On Governor Control Shaft
1982/12/08 New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08 6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves
1982/12/08 Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08 New Crankshaft Seal Groups Used
1982/12/08 6V4869 Adapter And 6V6174 Plug Can Be Used To Install Camshaft Bearings
1982/12/08 Resurfaced Cylinder Blocks And Heads
1982/12/08 List Of Service Publications
1982/12/08 6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.