New Fuel Nozzle Test Sheet Available
Usage:
All Caterpillar Truck Engines
A new fuel Nozzle Test Record sheet, Form SEHS8144, is available for dealer use. The record sheet has space to make a record of the test results for 16 fuel nozzles.
A filled in example test sheet is shown in the illustration.
Explanation Of Illustration
-
- 1. Nozzle Number 1 is a good nozzle and can be used again.
- 2. Nozzle Number 2 failed the "Cap/Bleed Screw Leakage " test. Install a new seal. Put the cap on the nozzle and test it again.
- 3. Nozzle Number 3 failed the "Plugged Orifice " test. The test was stopped at that point.
- 4. Nozzle Number 4 failed the "Tip Leakage " test. The test was stopped at that point.
- 5. Nozzle Number 5 failed the "VOP" test. The test was stopped at that point.
- 6. Nozzle Number 6 had a tip that had been cleaned with a steel wire brush. No other tests were done after the "Visual Inspection".
- 7. Nozzle Number 7 had a broken tip. No other tests were done after the "Visual Inspection".
- 8. Nozzle Number 8 is a good nozzle and can be used again.
- 1. Nozzle Number 1 is a good nozzle and can be used again.
Typical completed Nozzle Test Sheet. See topic "Explanation of Illustration ".
Caterpillar Information System:
1982/10/27 Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter
1982/10/27 Wider Crankshaft Gear Used
1982/10/27 New Oil Additives Can Cause High Copper (cu) Indications During S.o.s. Tests
1982/10/27 Dial Bore Gauge And Size Setting Fixture Available
1982/10/27 Indications From 6V3100 Timing Indicator Group Must Be Corrected For Some Applications
1982/10/27 Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/27 Engine Slobbering; New Piston And Rings Used
1982/10/27 New Fasteners Used For Fuel Injection Lines
1982/10/27 Extended Storage Procedures
1982/10/27 Field Conversion Procedure For Epa Certified On-highway Truck And On-highway Vehicle Engines
1982/10/27 Cold Weather Engine Operation
1982/10/27 List Of Service Publications
1982/10/27 Additional 3208 Remanufactured Truck Engines Available
1982/10/27 Bulged Capsule-type Fuel Nozzles
1982/10/27 Changes In Engine Rpm; Governor Does Not Operate Correctly
1982/12/08 Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/08 New Seal Used On Governor Control Shaft
1982/12/08 New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08 6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves
1982/12/08 Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08 New Crankshaft Seal Groups Used
1982/12/08 6V4869 Adapter And 6V6174 Plug Can Be Used To Install Camshaft Bearings
1982/12/08 Resurfaced Cylinder Blocks And Heads
1982/12/08 List Of Service Publications