New Rocker Arm Assemblies Used
Usage:
All 3208 Truck Engines
Description of Change: New rocker arm assemblies are used in the valve mechanism groups on the above engines. The new rocker arm assembly has the bearing assembled in the rocker arm with better accuracy. This keeps the oil hole in the bearing in the correct position in the rocker arm. If the oil hole is not in the correct position, too much oil can flow into the rocker arm area of the cylinder head.
Adaptable As: The new 2W8271 Rocker Arm Assembly is a direct replacement for the former 9L6386 Rocker Arm Assembly, which has been canceled. A new 2W6047 Thrust Washer must be used during replacement of a rocker arm assembly.
Caterpillar Information System:
1982/09/29 New Tool Makes Installation Of Carbon Stop Seals Easier
1982/09/29 New Torque Specification For Fuel Injection Pump Bushing
1982/09/29 Two Oil Change Kits Have Oil Filters, Cooling System Conditioner
1982/09/29 Do Not Use A Wire Brush On Fuel Nozzles
1982/09/29 Improved Idler Pulley Assemblies For 3208 Engines
1982/09/29 New Head Gasket Improves Seal Between Block And Liner Flange
1982/09/29 Induction Bearing Heater Available
1982/09/29 New Seal Rings Used In BrakeSavers
1982/09/29 New Bearing Used In Air Starting Motor
1982/09/29 New Water Pumps Use New Seal And Impeller
1982/09/29 Reusability Of Camshaft Rollers And Roller Followers
1982/09/29 Value Planned Engine Service: The Economical Way To Engine Repair
1982/10/27 Reconditioning Of Oil Pump Covers
1982/10/27 Planned Engine Repairs
1982/10/27 FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/27 List Of Service Publications
1982/10/27 Cold Weather Engine Operation
1982/10/27 Field Conversion Procedure For Epa Certified On-highway Truck And On-highway Vehicle Engines
1982/10/27 Extended Storage Procedures
1982/10/27 New Fasteners Used For Fuel Injection Lines
1982/10/27 Engine Slobbering; New Piston And Rings Used
1982/10/27 Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/27 Indications From 6V3100 Timing Indicator Group Must Be Corrected For Some Applications
1982/10/27 Dial Bore Gauge And Size Setting Fixture Available