1982/06/23 Caterpillar


Calibration Fluid For Fuel Injection Test Equipment Available

Usage:


Caterpillar's recommendation has always been to use SAE J967 (ISO 4113) calibration fluid in its fuel injection test benches and 5P4150 Nozzle Testing Groups. This calibration fluid is now available from the Parts Department in two different size containers. The 6V6068 Calibration Fluid is 19 liter (5 U.S. gal), and the 6V6067 Calibration Fluid is 208 liter (55 U.S. gal).

Formerly, this calibration fluid was only available from other suppliers.

Caterpillar Information System:

1982/06/23 New, Improved Impeller Used In Water Pump
1982/06/23 New Piston Group Has A Thicker Top Ring
1982/06/23 Separate Valve Stem Gauges Available
1982/06/23 Engine Ground Straps Necessary To Prevent Electrical Discharge Damage To Crankshaft Bearings
1982/06/23 Use New 6V4910 Clamp-on Ammeter For Easier Electrical Current Measurement
1982/06/23 Improved Water Separator Group Used
1982/06/23 List Of Main And Connecting Rod Bearings Currently Available
1982/06/23 New Address For Repair Of Diagnostic Tools
1982/06/23 Carbon Cutting On Piston Top Land
1982/06/23 Wrong Water Separator Element Will Not Remove Water
1982/06/23 Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies
1982/06/23 List Of Service Publications
1982/09/01 New Compression Ring Available For Control Of Excessive Oil Consumption
1982/09/01 Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01 List Of Service Publications
1982/09/01 Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge
1982/09/01 New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure
1982/09/01 Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems
1982/09/01 Improved Gasket Available For Engine Oil And Brakesaver Oil Cooler
1982/09/01 Use Correct Torque To Prevent Broken Rocker Arm Shafts
1982/09/01 Oil Passage Plugs Are No Longer Installed In Crankshafts For Parts Service
1982/09/01 Fuel Line Hoses Can Be Damaged In Locations Between Engine And Vehicle Components
1982/09/01 New Serial Numbers For 3208 Truck Engines
1982/09/01 New Thrust Washer Can Prevent Wrong Oil Sample Readings
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.