Use 5P5195 Fuel Line Wrench Correctly
Usage:
The 5P5195 Fuel Line Wrench is used to tighten the nuts on some fuel lines. It is possible to damage the crowfoot end of the wrench if it is not used correctly. The wrench can be damaged if a torque value of more than approximately 40 N ·m (30 lb ft) is used.
Caterpillar Information System:
1982/03/31 New Regulator Group Increases Coolant Flow To Cab Heater, Prevents Overcooling
1982/03/31 Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary
1982/03/31 New Gasket Used In Governor And Fuel Injection Pump Group
1982/03/31 Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/02/17 New Engine Testing And Adjusting Tools Give More Accuracy And Longer Service Life
1982/02/17 New Washers Permit Locks To Hold Better
1982/02/17 Hose Assembly Moved To A New Position
1982/02/17 New Idler Shaft Used In Fuel Transfer Pumps
1982/02/17 The Service Publications Information Feedback System
1982/02/17 New Flywheel Assemblies Used
1982/02/17 New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve
1982/02/17 List Of Service Publications
1982/03/31 Be Sure Your Engine's Performance Is At Its Best With Power Analysis Report (PAR)
1982/03/31 Carbon Build-up In Combustion And Inlet Areas
1982/03/31 New Piston Pin Retainer Used
1982/03/31 List Of Service Publications
1982/03/31 New Adapters And O-ring Seals Used In Aftercooler Group
1982/03/31 Engine Storage; Engine Start-up After Storage
1982/03/31 Use 6V6035 Hardness Tester On Crankshafts
1982/03/31 New Diaphragm Used In Fuel Ratio Control
1982/05/19 Fuel Rack Slots Have Improved Wear Resistance
1982/05/19 New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/19 Reminder: Check Valve Lash Adjustment At Correct Intervals
1982/05/19 Use The Correct Brakesaver Seal Group