New Flywheel Assemblies Used
Usage:
3208 Truck Engines
Description of Change: New flywheel assemblies are used on the above engines. The new flywheels are needed because of a change in the Spicer clutch that is used with them. The new flywheels permit clearance between the clutch disc rivets and the edge of the wear face of the flywheel. There is no clearance between the rivets and the wear face when one of the former flywheel assemblies is used with the new clutch.
Adaptable As: The new flywheel assemblies are direct replacements for the former flywheel assemblies as shown in the chart.
Caterpillar Information System:
1982/02/17 New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve
1982/02/17 List Of Service Publications
1982/02/17 New Fuel Nozzle Adapter Assembly Used
1982/02/17 Bent Lever For Fuel Shut-off Solenoid Can Cause Low Engine Performance
1982/02/17 Gasket Kits
1982/01/13 Check Bottom Surface Of Cylinder Liner Flange For Erosion And Wear
1982/01/13 Use Of Metric Fasteners
1982/01/13 Make Sure Coolant Conditioner Elements Are Changed At Correct Intervals
1982/01/13 New Cylinder Liners And O-ring Seals Give Longer Seal Life
1982/01/13 List Of Service Publications
1982/01/13 New Torque Specification For Bushing
1982/01/13 New Regulator Assemblies Used
1982/02/17 The Service Publications Information Feedback System
1982/02/17 New Idler Shaft Used In Fuel Transfer Pumps
1982/02/17 Hose Assembly Moved To A New Position
1982/02/17 New Washers Permit Locks To Hold Better
1982/02/17 New Engine Testing And Adjusting Tools Give More Accuracy And Longer Service Life
1982/03/31 Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31 New Gasket Used In Governor And Fuel Injection Pump Group
1982/03/31 Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary
1982/03/31 New Regulator Group Increases Coolant Flow To Cab Heater, Prevents Overcooling
1982/03/31 Use 5P5195 Fuel Line Wrench Correctly
1982/03/31 Be Sure Your Engine's Performance Is At Its Best With Power Analysis Report (PAR)
1982/03/31 Carbon Build-up In Combustion And Inlet Areas