3054 & 3056 MARINE GENERATOR SET ENGINES - INSTALLATION GUID Caterpillar


Power take-off

Usage:

PTO stub shaft (A1) can be supplied with the engine.

Axial Drives

A Fenner F80 tyre type coupling should be used, as shown in figure (B). The coupling has a flexible tyre (B1) with a taper lock flange (B2) and a taper lock (B3). The assembly fits on the PTO shaft (B4).

The maximum PTO capability including both axial and belt drives are:

Notes:

* Maximum recommended offtake 2 kW per belt.
* Multiple belt driven accessories should as far as possible be distributed evenly on the side of the engine to minimise side loads.
* Customers wanting to fit a nonstandard drive pulley or coupling, should ensure the inertia of the added components does not exceed 0.0313 kg/m2.
* If you are in any doubt, please contact your distributor.

Belt Drives

Standard options are:-

* Fenner 5" A section pulley with three grooves (C1) and taper lock (C2).

or

* A Fenner 5" B section pulley with two grooves (C3) and taper locks (C4).

In this case the maximum power which can be taken will be limited by the belts, and it will be necessary to calculate for marginal applications.


NOTICE

Additional inertia must not be added to the P.T.O. shaft without specialist advice. Consult your distributor if you need advice about non-standard drive arrangements.


Caterpillar Information System:

3054 & 3056 MARINE GENERATOR SET ENGINES - INSTALLATION GUID Raw Water Systems
3054 & 3056 MARINE GENERATOR SET ENGINES - INSTALLATION GUID Fuel systems
3054 & 3056 MARINE GENERATOR SET ENGINES - INSTALLATION GUID Exhaust systems
3054 & 3056 MARINE GENERATOR SET ENGINES - INSTALLATION GUID Engine room ventilation
3054 & 3056 MARINE GENERATOR SET ENGINES - INSTALLATION GUID Location of Engine Installation Points
Caterpillar 3056E Industrial Engine Electrical System Caterpillar 3056E Industrial Engine Electrical System
Caterpillar 3054 and 3056 Marine Generator Sets Electrical System Caterpillar 3054 and 3056 Marine Generator Sets Electrical System
C15, C18 and 3406E Marine Engine Electrical System (For Serial Numbers (9WR10000-UP) All Other Serial Numbers 1-UP) (Interactive) C15, C18 and 3406E Marine Engine Electrical System (For Serial Numbers (9WR10000-UP) All Other Serial Numbers 1-UP) (Interactive)
3412C EMCP II+ For PEEC Engines Electrical System 3412C EMCP II+ For PEEC Engines Electrical System
3412C EMCP II +for MUI Engines Electrical System (For Serial Numbers 9EP1-2989, BCW1-745, and 4BZ1-6087. All other Serial Numbers 1-UP) 3412C EMCP II +for MUI Engines Electrical System (For Serial Numbers 9EP1-2989, BCW1-745, and 4BZ1-6087. All other Serial Numbers 1-UP)
3412C EMCP II For PEEC Engines Electrical System 3412C EMCP II For PEEC Engines Electrical System
3406E and 3456 Generator Set Engine Electrical System 130-5614-09 3406E and 3456 Generator Set Engine Electrical System 130-5614-09
3054 & 3056 MARINE GENERATOR SET ENGINES - INSTALLATION GUID Electrolytic corrosion
3054 & 3056 MARINE GENERATOR SET ENGINES - INSTALLATION GUID AC voltage connections
3054 & 3056 MARINE GENERATOR SET ENGINES - INSTALLATION GUID Data
C1.5 and C2.2 Marine Generator Set Electrical System (Interactive) C1.5 and C2.2 Marine Generator Set Electrical System (Interactive)
3500B Locomotive Engine Electrical System - (Interactive) 151-9207-04 3500B Locomotive Engine Electrical System - (Interactive) 151-9207-04
3600 Diesel Marine Monitoring System Electrical System 3600 Diesel Marine Monitoring System Electrical System
3606,3608,3612,3616 Diesel Marine Monitoring System II Generator Monitoring System 3606,3608,3612,3616 Diesel Marine Monitoring System II Generator Monitoring System
G3516B Engine Electrical System 237-5810-03 G3516B Engine Electrical System 237-5810-03
UPS 250 Uninterruptible Power Supply Electrical System UPS 250 Uninterruptible Power Supply Electrical System
3456 Generator Set with EMCP II Electrical System 3456 Generator Set with EMCP II Electrical System
3456 Generator Set with EMCP II+ Electrical System (For Serial Numbers CCB1-930, and CBX1-5868. All other Serial Numbers 1-UP) 3456 Generator Set with EMCP II+ Electrical System (For Serial Numbers CCB1-930, and CBX1-5868. All other Serial Numbers 1-UP)
ABB CIRCUIT BREAKERS Technical Catalogue
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.