V-Belts
Usage:
Remove & Install V-Belts
1. Remove alternator and radiator guards (1).
2. Loosen alternator belt tightener bolt and nut (2).
3. Loosen alternator pivot mounting bolt and nut (5).
4. Tilt alternator (4) toward the engine.
5. Remove three V-Belts (3) from the pulleys.
NOTE: For installation of the V-Belts, reverse the removal steps.
6. Tighten the V-Belts to the correct tension. See the Specifications manual.
Caterpillar Information System:
3306B GENERATOR SET ENGINE Aftercooler
3306B GENERATOR SET ENGINE Oil Level Gauge
3306B GENERATOR SET ENGINE Radiator
3306B GENERATOR SET ENGINE Oil Filler Cap
3306B GENERATOR SET ENGINE Crankcase Breather
3306B GENERATOR SET ENGINE Control Panel
3306B GENERATOR SET ENGINE Fuel Pressure Gauge
3306B GENERATOR SET ENGINE Precleaner
3306B GENERATOR SET ENGINE Air Filter Elements
3306B GENERATOR SET ENGINE Introduction
3306B GENERATOR SET ENGINE Testing & Adjusting
3306B GENERATOR SET ENGINE Systems Operation
3306B GENERATOR SET ENGINE Alternator
3306B GENERATOR SET ENGINE Fan
3306B GENERATOR SET ENGINE Fan Adapter
3306B GENERATOR SET ENGINE Fan Drive
3306B GENERATOR SET ENGINE Engine Lift Brackets
3306B GENERATOR SET ENGINE Electric Starting Motor
3306B GENERATOR SET ENGINE Fuel Injection Lines
3306B GENERATOR SET ENGINE Fuel Injection Nozzles
3306B GENERATOR SET ENGINE Fuel Injection Pump Housing & Governor
3306B GENERATOR SET ENGINE Governor
3306B GENERATOR SET ENGINE Fuel Injection Pumps
3306B GENERATOR SET ENGINE Fuel Injection Pump Housing