3306B GENERATOR SET ENGINE Caterpillar


Indicators

Usage:

Fuel Pressure

2W3687

NOTE: Pointer movement beyond point A of indicator band not permitted.

NOTE: Pointer must stop within +0.0 -2.0 mm (+.00 -.08 in) of point C.

Volt

105-1457

NOTE: Prior to inspection, warm up indicator for minimum of five minutes with 27.2 volts applied then use voltage from calibration chart to inspect individual pointer positions.

Engine Oil Pressure

4W2065

NOTE: Prior to inspection, warm up indicator for minimum of five minutes with 27.2 ± 0.3 volts applied then use voltage from calibration chart to inspect individual pointer positions.

Water Temperature

4W0483

NOTE: Prior to inspection, warm up indicator for minimum of five minutes with 27.2 ± 0.3 volts applied then use voltage from calibration chart to inspect individual pointer positions.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.