G342 ENGINE Caterpillar


Magneto Drive

Usage:

Rotation is clockwise as seen from rear of engine.

(1) Bore for bearing ... 1.4205 ± .0015 in.(36.081 ± 0.038 mm)

Diameter of magneto drive shaft ... 1.4155 ± .0005 in.(35.954 ± 0.013 mm)

(2) Bore for bearing ... .629 to .630 in.(15.98 to 16.00 mm)

Diameter of magneto drive shaft ... .6235 ± .0003 in.(15.837 ± 0.008 mm)

(3) Bore for bearing ... .629 to .630 in.(15.98 to 16.00 mm)

Diameter of drive shaft ... .6235 ± .0003 in.(15.837 ± 0.008 mm)

(4) Bore for bearing ... 1.4365 ± .0005 in.(36.487 ± 0.013 mm)

Diameter of drive shaft ... 1.4337 ± .0003 in.(36.416 ± 0.008 mm)

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.