Flywheel
Usage:
Remove Flywheel
1. Remove the four carrier-to-flywheel retaining bolts. Install two 5/8"-11NC forcing screws, and separate the carrier (1) from flywheel.
2. Install a 5/8"-11NC forged eyebolt in flywheel and attach a hoist.
3. Remove the flywheel-to-crankshaft retaining bolts.
4. Remove the flywheel-weight 350 lbs. (160 kg).
Install Flywheel
1. Attach hoist and position flywheel on engine.
2. Install the flywheel retaining bolts, tighten the bolts to 640 ± 80 lb. ft. (88,5 ± 11,1 mkg).
3. Install the carrier and retaining bolts.
Caterpillar Information System:
D349 INDUSTRIAL & MARINE ENGINES Starting Motors
D349 INDUSTRIAL & MARINE ENGINES Sea Water Pump
D349 INDUSTRIAL & MARINE ENGINES Water Pump
D349 INDUSTRIAL & MARINE ENGINES Cylinder Liners
D349 INDUSTRIAL & MARINE ENGINES Pistons
D349 INDUSTRIAL & MARINE ENGINES Spacer Plates
D349 INDUSTRIAL & MARINE ENGINES Left Front Cylinder Head Assembly
D349 INDUSTRIAL & MARINE ENGINES Right Rear Or Left Rear Cylinder Head Assembly (Alternate Method)
D349 INDUSTRIAL & MARINE ENGINES Right Rear Cylinder Head Assembly
D349 INDUSTRIAL & MARINE ENGINES Right Front Or Left Front Cylinder Head Assembly (Alternate Method)
D349 INDUSTRIAL & MARINE ENGINES Right Front Cylinder Head Assembly
D349 INDUSTRIAL & MARINE ENGINES Left Rear Camshaft Housing
D349 INDUSTRIAL & MARINE ENGINES Crankshaft Rear Seal Ring And Thrower
D349 INDUSTRIAL & MARINE ENGINES Crankshaft Rear Seal
D349 INDUSTRIAL & MARINE ENGINES Flywheel Housing
D349 INDUSTRIAL & MARINE ENGINES Rear Timing Gears & Plate
D349 INDUSTRIAL & MARINE ENGINES Crankshaft
D349 INDUSTRIAL & MARINE ENGINES Crankshaft
6.25" BORE ENGINE ATTACHMENTS Systems Operation
6.25" BORE ENGINE ATTACHMENTS Testing And Adjusting
6.25" BORE ENGINE ATTACHMENTS 2N6006 Governor Air Actuator
6.25" BORE ENGINE ATTACHMENTS 1N9318 & 7L135 Governor Air Actuators
6.25" BORE ENGINE ATTACHMENTS 2N6961 Clutch Assembly
6.25" BORE ENGINE ATTACHMENTS Flexible Coupling