Spacer Plate
Usage:
Remove Spacer Plate
preparatory step:
a) remove cylinder head assembly
1. Install six 3/8" -16NC forcing screws (1) and remove the spacer plate.
Install Spacer Plate
1. Thoroughly clean the spacer plate and mating surface of the cylinder block.
2. Install a new spacer plate gasket and install the spacer plate.
Show/hide table
| NOTICE |
|---|
Mating surfaces of spacer plate and cylinder block and both sides of spacer plate gasket must be clean and dry. Do not apply gasket adhesives or other substances to these surfaces. |
3. Check the liner projection. See the covering topic.
concluding step:
a) install cylinder head assembly
Caterpillar Information System:
D343 INDUSTRIAL & MARINE ENGINES Pistons
D343 INDUSTRIAL & MARINE ENGINES Cylinder Head Assembly
D343 INDUSTRIAL & MARINE ENGINES Camshafts
D343 INDUSTRIAL & MARINE ENGINES Aftercooler Core
D343 INDUSTRIAL & MARINE ENGINES Water Cooled Exhaust Manifold
D343 INDUSTRIAL & MARINE ENGINES Exhaust Manifold
D343 INDUSTRIAL & MARINE ENGINES Turbocharger
D343 INDUSTRIAL & MARINE ENGINES Turbocharger Heat Shield
D343 INDUSTRIAL & MARINE ENGINES Precombustion Chambers,Air Cleaner Housing
D343 INDUSTRIAL & MARINE ENGINES Fuel Injection Valves
D343 INDUSTRIAL & MARINE ENGINES Front Cover
D343 INDUSTRIAL & MARINE ENGINES Crankshaft Front Seal
D343 INDUSTRIAL & MARINE ENGINES Cylinder Liners
D343 INDUSTRIAL & MARINE ENGINES Jacket Water Pump
D343 INDUSTRIAL & MARINE ENGINES Sea Water Pump
D343 INDUSTRIAL & MARINE ENGINES Sea Water Pump Drive Group
D343 INDUSTRIAL & MARINE ENGINES Flywheel
D343 INDUSTRIAL & MARINE ENGINES Crankshaft Rear Seal
D343 INDUSTRIAL & MARINE ENGINES Flywheel Housing
D343 INDUSTRIAL & MARINE ENGINES Timing Gears
D343 INDUSTRIAL & MARINE ENGINES Timing Gear Plate
D343 INDUSTRIAL & MARINE ENGINES Crankshaft
D349 VEHICULAR ENGINE Systems Operation
D349 VEHICULAR ENGINE Testing And Adjusting