Starter
Usage:
Remove Starter
1. Disconnect the wiring from the starter.
2. Fasten a hoist to the starter.
3. Remove the three bolts (1), and remove the starter. Weight of starter is 65 lb. (30 kg).
Install Starter
1. Fasten a hoist and put the starter in position on the flywheel housing.
2. Install the three bolts in starter.
3. Connect wiring to the starter.
Caterpillar Information System:
1674 DIESEL TRUCK ENGINE Testing And Adjusting
1674 DIESEL TRUCK ENGINE Systems Operation
7241 MARINE TRANSMISSION Control Valve
7241 MARINE TRANSMISSION Bottom Shaft
7241 MARINE TRANSMISSION Idler Gear
7241 MARINE TRANSMISSION Planetary Gear Section
7241 MARINE TRANSMISSION Top Shaft
7241 MARINE TRANSMISSION Testing And Adjusting
7241 MARINE TRANSMISSION Systems Operation
7241 MARINE TRANSMISSION Control Valve (3T2295)
7241 MARINE TRANSMISSION Oil Filter (2S6457)
7241 MARINE TRANSMISSION Clutches (1N7005)
1674 DIESEL TRUCK ENGINE Alternator
1674 DIESEL TRUCK ENGINE Bypass Valves
1674 DIESEL TRUCK ENGINE Water Pump
1674 DIESEL TRUCK ENGINE Oil Cooler
1674 DIESEL TRUCK ENGINE Air Compressor
1674 DIESEL TRUCK ENGINE Fuel Ratio Control
1674 DIESEL TRUCK ENGINE Fuel Filter Bypass Valve
1674 DIESEL TRUCK ENGINE Housing
1674 DIESEL TRUCK ENGINE Fuel Shutoff Solenoid
1674 DIESEL TRUCK ENGINE Fuel Transfer Pump
1674 DIESEL TRUCK ENGINE Variable Timing Unit
1674 DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor