Oil Manifold
Usage:
Removal
REMOVING OIL MANIFOLD
1-Oil manifold. 2-O-ring seal. 3-Passage to astern drive clutch. 4-Passage to ahead drive clutch. 5-O-ring seal. 6-Oil pump drive shaft. 7-Ring-type oil seals.
Show/hide table
| NOTICE |
|---|
Force the manifold off evenly using forcing screws to avoid damaging the O-ring seal (2) and ferrule and ring-type seals (7) located on the end of the oil pump drive shaft. |
Oil Manifold Installation
1. When installing the manifold, check to see that the ring-type seals (7) are in a locked position.
2. Inspect O-ring seals (2) and (5) and replace if damaged.
Caterpillar Information System:
7251 MARINE GEAR Control Valve
7251 MARINE GEAR Oil Filter Removal And Installation
7251 MARINE GEAR Oil Pump
7251 MARINE GEAR Fabricated Tools
7251 MARINE GEAR Testing And Adjusting
7251 MARINE GEAR Systems Operation
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C Tu-Flo 700 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C Tu-Flo 600 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C Tu-Flo 501 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C Tu-Flo 400, 500, 1000 Compressors
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C Tu-Flo 300 Compressor
G343 ENGINE Turbocharger (T18)
7251 MARINE GEAR Magnetic Strainer Removal And Installation
7251 MARINE GEAR Oil Cooler Removal And Installation
7251 MARINE GEAR Ahead And Astern Clutches And Clutch Shafts
7251 MARINE GEAR Idler Shaft
7251 MARINE GEAR Lower Shaft
7251 MARINE GEAR Planetary Reduction Gears
7251 MARINE GEAR Control Valve (1N8569)
7251 MARINE GEAR Directional Clutch (4L4320)
7251 MARINE GEAR Oil Filter (2S6457)
7251 MARINE GEAR Oil Pump (4T4093)
D349 INDUSTRIAL & MARINE ENGINES Systems Operation
D349 INDUSTRIAL & MARINE ENGINES Testing And Adjusting