Flywheel
Usage:
Remove Flywheel
1. Install a 5/8"-11NC forged eyebolt in the flywheel and attach a hoist.
2. Remove the flywheel-to-crankshaft retaining bolts (1).
3. Remove the flywheel - weight 350 lbs. (160 kg).
Install Flywheel
1. Attach a hoist and position the flywheel on engine.
2. Install the flywheel retaining bolts. Tighten the bolts to 640 ± 80 lb. ft. (88,5 ± 11,1 mkg).
Caterpillar Information System:
D346 Marine Engine Raw Water Pump
D346 Marine Engine Jacket Water Pump
D346 Marine Engine Turbocharger Lubrication Valve
D346 Marine Engine Starter
D346 Marine Engine Cylinder Liners
D346 Marine Engine Pistons
D346 Marine Engine Spacer Plates
D346 Marine Engine Left Cylinder Head Assembly
D346 Marine Engine Right Cylinder Head Assembly
D346 Marine Engine Left Camshaft Housing
D346 Marine Engine Right Camshaft Housing
D346 Marine Engine Precombustion Chambers
D346 Marine Engine Crankshaft Rear Seal Ring And Thrower
D346 Marine Engine Flywheel Housing
D346 Marine Engine Rear Timing Gears And Plate
D346 Marine Engine Crankshaft
G343 ENGINE Systems Operation
G343 ENGINE Testing And Adjusting
G343 ENGINE Gas Pressure Regulator
G343 ENGINE Pressure Differential Regulator (7S7810)
G343 ENGINE Water Temperature Gauge (6L2311)
G343 ENGINE Oil Pressure Gauge (6L2310)
G343 ENGINE Ignition System
G343 ENGINE Camshaft And Follower