Glow Plugs
Usage:
Remove Glow Plugs
preparatory step:
a) remove valve covers
1. Disconnect wiring (1) from glow plug.
2. Remove the glow plug (2) from precombustion chamber.
Install Glow Plugs
1. Coat the threads of glow plug with 9M3710 Anti-Seize Compound.
2. Install the glow plug in precombustion chamber and tighten plug to 120 ± 24 lb. in. (138,4 ± 27,67 cm. kg).
3. Connect wiring to glow plug.
concluding step:
a) install valve cover
Caterpillar Information System:
D348 VEHICULAR ENGINE Fuel Injection Valves
D348 VEHICULAR ENGINE Valve Covers,
D348 VEHICULAR ENGINE Aftercooler Cores
D348 VEHICULAR ENGINE Turbochargers
D348 VEHICULAR ENGINE Exhaust Manifolds
D348 VEHICULAR ENGINE Fuel Injection Pump Housing
D348 VEHICULAR ENGINE Variable Timing Unit
D348 VEHICULAR ENGINE Governor
D348 VEHICULAR ENGINE Fuel Ratio Control
D348 VEHICULAR ENGINE Fuel Injection Lines
D348 VEHICULAR ENGINE Fuel Filter Housing
D348 VEHICULAR ENGINE Fuel Filter Elements
D348 VEHICULAR ENGINE Precombustion Chambers
D348 VEHICULAR ENGINE Camshaft Housings
D348 VEHICULAR ENGINE Right Cylinder Head Assembly
D348 VEHICULAR ENGINE Left Cylinder Head Assembly
D348 VEHICULAR ENGINE Spacer Plates
D348 VEHICULAR ENGINE Pistons
D348 VEHICULAR ENGINE Cylinder Liners
D348 VEHICULAR ENGINE Air Compressor
D348 VEHICULAR ENGINE Flywheel
D348 VEHICULAR ENGINE Crankshaft Rear Seal
D348 VEHICULAR ENGINE Flywheel Housing
D348 VEHICULAR ENGINE Rear Timing Gears And Plate