Valve Covers,


Remove Valve Covers

1. Loosen the crankcase breather pipe hose clamp (left valve cover only).

2. Remove the valve cover mounting bolts. Remove the valve cover.

Install Valve Covers

1. Install a new valve cover seal if necessary.

NOTE: When installing new seal, cut the seal to provide a minimum of 1 in. (2,5 cm) overlap.

2. Position the valve cover on engine and install mounting bolts.

3. Tighten the crankcase breather pipe hose clamp.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.