Fuel Injection Lines


Remove Fuel Injection Lines

1. Remove the fuel injection line hold-down clips (1) and mounting bolts.

2. Disconnect the fuel injection lines from the fuel injection pump housing.

3. Disconnect the fuel injection lines from the camshaft housings.

4. Remove the fuel injection lines. Install caps or plugs on all lines or openings.

Install Fuel Injection Lines

1. Remove the caps and plugs from lines and openings.

2. Position the fuel injection lines on engine.

3. Connect lines to fuel injection pump housing and to camshaft housings. Tighten the retaining nuts (2) to 30 ± 5 lb. ft. (4,1 ± 0,7 mkg).

4. Install the fuel injection line retaining clips and mounting bolts.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.