Vibration Damper And Pulley
Usage:
Remove Vibration Damper And Pulley
1. Remove the vibration damper retaining bolts, lockwashers and retainer. Reinstall the retainer and bolts with a suitable spacer (1) between the crankshaft and retainer. Tighten the retaining bolts.
2. Install tool setup (A) and separate the vibration damper and pulley from the crankshaft.
3. Remove the tool setup and attach a hoist to the pulley. Remove the retainer, bolts and spacer. Remove the vibration damper and pulley as a unit - weight 150 lbs. (68 kg).
Install Vibration Damper And Pulley
1. Attach a hoist and position the vibration damper and pulley on the crankshaft.
2. Install the retainer, lockwashers and bolts. Tighten the retaining bolts to 130 ± 12 lb. ft. (18,0 ± 1,7 mkg). Tap the retaining bolts with a hammer and retighten to the above torque.
Caterpillar Information System:
D348 VEHICULAR ENGINE Water Temp. Regulators
D348 VEHICULAR ENGINE Aftercooler Water Pump
D348 VEHICULAR ENGINE Water Pump
D348 VEHICULAR ENGINE Piston Cooling Jets
D348 VEHICULAR ENGINE Crankshaft Main Bearings
D348 VEHICULAR ENGINE Connecting Rod Bearings
D348 VEHICULAR ENGINE Oil Pump
D348 VEHICULAR ENGINE Oil Pan
D348 VEHICULAR ENGINE Oil Filter Base
D348 VEHICULAR ENGINE Oil Cooler
D348 VEHICULAR ENGINE Filter Elements
D348 VEHICULAR ENGINE Turbocharger Lubrication Valve
D348 VEHICULAR ENGINE Crankshaft Front Seal
D348 VEHICULAR ENGINE Front Timing Gear Cover
D348 VEHICULAR ENGINE Front Timing Gears And Plate
D348 VEHICULAR ENGINE Fuel Priming Pump
D348 VEHICULAR ENGINE Fuel Transfer Pump
D348 VEHICULAR ENGINE Fuel Filter Elements
D348 VEHICULAR ENGINE Fuel Filter Housing
D348 VEHICULAR ENGINE Fuel Injection Lines
D348 VEHICULAR ENGINE Fuel Ratio Control
D348 VEHICULAR ENGINE Governor
D348 VEHICULAR ENGINE Variable Timing Unit
D348 VEHICULAR ENGINE Fuel Injection Pump Housing