Water Temp. Regulators


Remove Water Temperature Regulators and Housing

1. Drain the cooling system.

2. Disconnect bypass water line from water temperature regulator housing.

3. Disconnect water temperature outlet lines from housing.

4. Remove the regulator housing mounting bolts. Remove the housing (1) and water temperature regulators.

Install Water Temperature Regulators And Housing

1. Position the water temperature regulator housing to the engine and install mounting bolts.

2. Connect the water outlet lines to housing.

3. Connect bypass water line to housing.

4. Fill the cooling system.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.