5.4" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Caterpillar


Governor Air Actuator (2N6006)

Usage:

Range of operation ... 10 to 80 psi(0,79 to 5,6 kg/cm2)

Air pressure at high idle ... 65 psi(4,57 kg/cm2)

Maximum air pressure ... 80 psi(5,62 kg/cm2)

(1) 7J9958 Spring:

Length under test force ... 5.75 in.(146,1 mm)

Test force ... 100 lbs.(45,4 kg)

Free length after test ... 6.19 in.(157,2 mm)

Outside diameter ... 3.88 in.(98,6 mm)

(2) 2N6005 Spring:

Length under test force ... 3.80 in.(96,5 mm)

Test force ... 20.80 lbs.(9,4 kg)

Free length after test ... 4.91 in.(124,7 mm)

Outside diameter ... .86 in.(21,8 mm)

Caterpillar Information System:

5.4" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Prelubrication Pump Motor (Electric)
5.4" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Air Valves For Air Starting System
5.4" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Governor Air Actuator Linkage
5.4" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Auxiliary Drive
5.4" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Starting Air Regulating Valve (1L5011)
5.4" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Governor (Woodward UG-8)
5.4" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Rear Enclosed Clutch
5.4" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Governor Actuator (Woodward EG-3P)
5.4" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Governor (Woodward PSG)
5.4" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Front Power Take Off (8L9435 and 2N7075)
5.4" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Shut Off Solenoids
5.4" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Oil Pressure Shutoff (8L4908)
5.4" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Magnetic Pickup
5.4" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Output Shaft Governor (2N2806)
5.4" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Shut Off Valve (Water Temperature) (4L7108)
5.4" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Prelubrication Pump Motor Relay
5.4" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Prelubrication Pump
D346 INDUSTRIAL & MARINE ENGINES Systems Operation
D346 INDUSTRIAL & MARINE ENGINES Testing And Adjusting
GENERAL INSTRUCTIONS General Instructions
7261 MARINE GEAR Systems Operation
7261 MARINE GEAR Testing And Adjusting
7261 MARINE GEAR Upper Shaft And Clutch Removal
7261 MARINE GEAR Upper Shaft And Clutch Installation
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.