PRODUCT SUPPORT PROGRAM FOR REMOVING SPACER FROM THE AUTOMATIC TIMING ADVANCE ON CERTAIN 3412C GENERATOR SETS
Usage:
REBE1445-00
Show/hide table
| 22Nov2006 |
U-752
A-719
Show/hide table
| Before/After | PRODUCT SUPPORT PROGRAM FOR REMOVING SPACER FROM THE AUTOMATIC TIMING ADVANCE ON CERTAIN 3412C GENERATOR SETS |
|
| 1288 | PS42292 |
|
Show/hide table
| NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS42292" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
TERMINATION DATE |
| 30Nov2008 |
PROBLEM
Show/hide table
| A spacer was incorrectly assembled into the automatic timing advance on certain 3412C generator sets. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 3412C | DJN01252-01253, 1259, 1265, 1268, 1290-1291 |
PARTS NEEDED
Show/hide table
| No parts needed for this program |
ACTION REQUIRED
Show/hide table
| Refer to SEBU7125 Operations and Maintenance Manual for safety precautions prior to starting repairs. Refer to RENR1389 Disassembly and Assembly Manual, Automatic Timing Advance. Remove the 123-6010 Spacer from the drive group (Image 1). Correct configuration is shown in Image 2. |
Show/hide table
|
| Image1 |
|
| Image2 |
SERVICE CLAIM ALLOWANCES
Show/hide table
0-24 mo |
||||||
Show/hide table
| NOTE: This is a 1.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR INTAKE VALVE LOW PRESSURE ACTUATORS REPLACEMENT ON CERTAIN C13 TRUCK ENGINES. PRODUCT SUPPORT PROGRAM FOR INTAKE VALVE LOW PRESSURE ACTUATORS REPLACEMENT ON CERTAIN C13 TRUCK ENGINES.
PRODUCT IMPROVEMENT PROGRAM TO REPLACE THE GENERATOR ADAPTER BOLTS ON CERTAIN C9, C15, 3406, AND 3456 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM TO REPLACE THE GENERATOR ADAPTER BOLTS ON CERTAIN C9, C15, 3406, AND 3456 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGER BOOST AIR PIPES ON CERTAIN 3512B HD LOCOMOTIVE ENGINES. PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGER BOOST AIR PIPES ON CERTAIN 3512B HD LOCOMOTIVE ENGINES.
PRODUCT SUPPORT PROGRAM FOR THE REPLACEMENT OF THE LOW PRESSURE ACTURATORS FOR THE INTAKE VALVE ON CERTAIN C13 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR THE REPLACEMENT OF THE LOW PRESSURE ACTURATORS FOR THE INTAKE VALVE ON CERTAIN C13 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A 296-8050 HIGH INERTIA COUPLING GROUP ON CERTAIN G3520C GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A 296-8050 HIGH INERTIA COUPLING GROUP ON CERTAIN G3520C GENERATOR SETS
Product Improvement Program to inspect/repair fan drive bearing on certain C32 fan drives. Product Improvement Program to inspect/repair fan drive bearing on certain C32 fan drives.
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 247-0308 GENERATOR SET COUPLING ON CERTAIN G3520C GENERATOR SETS WHEN THE MAXIMUM AMBIENT TEMPERATURE NEAR THE DAMPER GROUP IS LESS THAN 50C. PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 247-0308 GENERATOR SET COUPLING ON CERTAIN G3520C GENERATOR SETS WHEN THE MAXIMUM AMBIENT TEMPERATURE NEAR THE DAMPER GROUP IS LESS THAN 50C.
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE GENERATOR SET COUPLING 5N-3765 WITH A 296-8050 ON CERTAIN G3520C GENERATOR SETS WHEN THE MAXIMUM AMBIENT TEMPERATURE NEAR THE DAMPER GROUP IS LESS THAN 50C. PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE GENERATOR SET COUPLING 5N-3765 WITH A 296-8050 ON CERTAIN G3520C GENERATOR SETS WHEN THE MAXIMUM AMBIENT TEMPERATURE NEAR THE DAMPER GROUP IS LESS THAN 50C.
PRODUCT SUPPORT PROGRAM FOR FITTING A MODIFIED FUEL FILTER ARRANGEMENT TO CERTAIN C6.6 ENGINES USED IN TAMROCK ROCKDRILL APPLICATIONS PRODUCT SUPPORT PROGRAM FOR FITTING A MODIFIED FUEL FILTER ARRANGEMENT TO CERTAIN C6.6 ENGINES USED IN TAMROCK ROCKDRILL APPLICATIONS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION TEMPERATURE AND PRESSURE SENSORS ON CERTAIN C32 ACERT MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION TEMPERATURE AND PRESSURE SENSORS ON CERTAIN C32 ACERT MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR FITTING A MODIFIED FUEL FILTER ARRANGEMENT TO CERTAIN C6.6 ENGINES IN ROCKDRILL APPLICATIONS PRODUCT SUPPORT PROGRAM FOR FITTING A MODIFIED FUEL FILTER ARRANGEMENT TO CERTAIN C6.6 ENGINES IN ROCKDRILL APPLICATIONS
PRODUCT SUPPORT PROGRAM FOR INTAKE VALVE LOW PRESSURE ACTUATORS REPLACEMENT ON CERTAIN C13 TRUCK ENGINES. PRODUCT SUPPORT PROGRAM FOR INTAKE VALVE LOW PRESSURE ACTUATORS REPLACEMENT ON CERTAIN C13 TRUCK ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FAN GUARD ON CERTAIN 3456 GENERATOR SETS(60HZ) PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FAN GUARD ON CERTAIN 3456 GENERATOR SETS(60HZ)
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 208-8464 & 208-9636 FAN GUARDS FROM DEALER PART STOCK. PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 208-8464 & 208-9636 FAN GUARDS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN IMPROVED CLAMPING SUPPORT FOR THE FUEL DELIVERY LINE ON CERTAIN C6.6 IOPU/GENSET APPLICATIONS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN IMPROVED CLAMPING SUPPORT FOR THE FUEL DELIVERY LINE ON CERTAIN C6.6 IOPU/GENSET APPLICATIONS
PRODUCT IMPROVEMENT PROGRAM TO REPLACE THE FAN DRIVE PULLEY ON CERTAIN C15 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM TO REPLACE THE FAN DRIVE PULLEY ON CERTAIN C15 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM TO REPLACE THE FAN DRIVE PULLEY ON CERTAIN C15 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM TO REPLACE THE FAN DRIVE PULLEY ON CERTAIN C15 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 110-4422 AND 110-4424 RECTIFIERS, 4P-6009 VARISTORS, AND ASSOCIATED HEAT SINK ASSEMBLIES FROM DEALER INVENTORY PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 110-4422 AND 110-4424 RECTIFIERS, 4P-6009 VARISTORS, AND ASSOCIATED HEAT SINK ASSEMBLIES FROM DEALER INVENTORY
PRODUCT SUPPORT PROGRAM FOR REPLACING 266-0053 AFTERCOOLERS ON 3406E ENGINES OWNED BY NEW YORK WATERWAY. PRODUCT SUPPORT PROGRAM FOR REPLACING 266-0053 AFTERCOOLERS ON 3406E ENGINES OWNED BY NEW YORK WATERWAY.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK. PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 10R4134 SHORT BLOCKS, 10R4139 SHORT BLOCKS, 10R4144 LONG BLOCKS, and 10R4145 LONG BLOCKS FROM DEALER PART STOCK. PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 10R4134 SHORT BLOCKS, 10R4139 SHORT BLOCKS, 10R4144 LONG BLOCKS, and 10R4145 LONG BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 3408 AND 3412 REMANUFACTURED ENGINES FROM DEALER PART STOCK. PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 3408 AND 3412 REMANUFACTURED ENGINES FROM DEALER PART STOCK.
PRODUCT SUPPORT PROGRAM FOR THE REPLACEMENT OF INTAKE VALVE LOW PRESSURE ACTUATORS ON CERTAIN C13 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR THE REPLACEMENT OF INTAKE VALVE LOW PRESSURE ACTUATORS ON CERTAIN C13 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING ADDITIONAL SUPPORT FOR THE FUEL DELIVERY LINE ON CERTAIN MACHINES AND INDUSTRIAL APPLICATIONS POWERED BY C6.6 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING ADDITIONAL SUPPORT FOR THE FUEL DELIVERY LINE ON CERTAIN MACHINES AND INDUSTRIAL APPLICATIONS POWERED BY C6.6 ENGINES