PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 0R9962 CLINDER PACKS FROM DEALER PARTS STOCK Caterpillar


PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 0R9962 CLINDER PACKS FROM DEALER PARTS STOCK

Usage:



REBE1290-01

22Sep2006
(Revised 17Jan2007)


U-646
A-628
D-611
O-627

 
Parts stock action only
  
  

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 0R9962 CLINDER PACKS FROM DEALER PARTS STOCK

1201 1225 1239 7750
PI70208
NOTE:

The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.

 
NOTE:

This Revised Service Letter replaces the September 22, 2006 Service Letter. Changes have been made to the Parts Disposition section.


TERMINATION DATE

30Sep2007


PROBLEM

The bushing bores on some remanufactured piston crowns are out of specification tolerance. The incorrect machining will cause misaligned bushing bores on the piston crown. The misaligned bushing bore may cause a piston pin seizure.


ACTION REQUIRED

Remove all 0R9962 Cylinder Packs in parts stock with a date code prior to October 1, 2006. The date code is located on the part number tag on the outside of the packing box. The date code appears as a DDMMYY code (ie. D01M10Y06 = October 1, 2006).


SERVICE CLAIM ALLOWANCES

Submit one claim for all parts removed from dealer parts stock.


PARTS DISPOSITION

Any parts removed from parts stock should be returned on your next core shipment to local core inspection facility. PLEASE IGNORE THE NORMAL 15 DAY HOLDING PERIOD REQUIREMENT. Package these parts separately from normal cores on shipment and label each case with PI70208. All parts returned must have a Core Credit Request (CCR) entered into CMIS2 to allow for core credit refund to be processed. Remember to document your Cat warranty claim number on the CCR to ensure 100% core credit is processed for the returned parts.
 
 
 

Caterpillar Information System:

PRODUCT SUPPORT PROGRAM FOR CHANGING WARNING AND SHUT DOWN TRIP POINTS ON CERTAIN G3606, G3608, G3612, AND G3616 A3 ENGINES PRODUCT SUPPORT PROGRAM FOR CHANGING WARNING AND SHUT DOWN TRIP POINTS ON CERTAIN G3606, G3608, G3612, AND G3616 A3 ENGINES
Product support program for reworking the Power Distribution Panel Harness Assembly on certain 3500B Series II Marine Propulsion engines Product support program for reworking the Power Distribution Panel Harness Assembly on certain 3500B Series II Marine Propulsion engines
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 3516B SERIES ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 3516B SERIES ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING SOFTWARE ON CERTAIN C9 ACERT MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING SOFTWARE ON CERTAIN C9 ACERT MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3512B PETROLEUM GENSET ENGINES. PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3512B PETROLEUM GENSET ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING FUEL LINES ON CERTAIN 3516B HD LOCOMOTIVE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING FUEL LINES ON CERTAIN 3516B HD LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING DRIVELINE ON CERTAIN C-18 GENERATOR SETS WITH LC6 GENERATORS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING DRIVELINE ON CERTAIN C-18 GENERATOR SETS WITH LC6 GENERATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTIAN 0R7467 CYLINDER HEADS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTIAN 0R7467 CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR INSTALLING WIRING HARNESSES FOR CERTAIN C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR INSTALLING WIRING HARNESSES FOR CERTAIN C32 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS ON CERTAIN C32 AND 3508 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS ON CERTAIN C32 AND 3508 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS FOR CERTAIN C32 AND 3500 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS FOR CERTAIN C32 AND 3500 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LUBE OIL PUMP ON CERTAIN C6.6 INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LUBE OIL PUMP ON CERTAIN C6.6 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTON SKIRTS ON CERTAIN C12 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTON SKIRTS ON CERTAIN C12 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR FLASHING ENGINE SOFTWARE ON CERTAIN C-13 INDUSTIRAL ENGINES INSTALLED IN AGRICULTIRAL PRODUCTS PRODUCT IMPROVEMENT PROGRAM FOR FLASHING ENGINE SOFTWARE ON CERTAIN C-13 INDUSTIRAL ENGINES INSTALLED IN AGRICULTIRAL PRODUCTS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CUSTOMER E-STOP WIRING FOR CERTAIN 3500B MARINE PROPULSION ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CUSTOMER E-STOP WIRING FOR CERTAIN 3500B MARINE PROPULSION ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES. PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FAN PULLEY GROUP ON CERTAIN 3516 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FAN PULLEY GROUP ON CERTAIN 3516 GENERATOR SETS
Product Improvement Program for replacing the union in the fuel/water separator fuel line on certain C32 generator sets Product Improvement Program for replacing the union in the fuel/water separator fuel line on certain C32 generator sets
Product Improvement Program for reworking the 1U8763 Lifting Bracket Assembly. Product Improvement Program for reworking the 1U8763 Lifting Bracket Assembly.
PRODUCT SUPPORT PROGRAM FOR REPLACING AFTERCOOLERS ON C9 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING AFTERCOOLERS ON C9 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR THE REPLACEMENT OF THE LOW PRESSURE ACTURATORS FOR THE INTAKE VALVE ON CERTAIN C13 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR THE REPLACEMENT OF THE LOW PRESSURE ACTURATORS FOR THE INTAKE VALVE ON CERTAIN C13 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN CAT MESSENGER DISPLAY GROUPS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN CAT MESSENGER DISPLAY GROUPS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR INTAKE VALVE LOW PRESSURE ACTUATORS REPLACEMENT ON CERTAIN C13 TRUCK ENGINES. PRODUCT SUPPORT PROGRAM FOR INTAKE VALVE LOW PRESSURE ACTUATORS REPLACEMENT ON CERTAIN C13 TRUCK ENGINES.
PRODUCT SUPPORT PROGRAM FOR FITTING A MODIFIED FUEL FILTER ARRANGEMENT TO CERTAIN C6.6 ENGINES IN ROCKDRILL APPLICATIONS PRODUCT SUPPORT PROGRAM FOR FITTING A MODIFIED FUEL FILTER ARRANGEMENT TO CERTAIN C6.6 ENGINES IN ROCKDRILL APPLICATIONS
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.