PRODUCT SUPPORT PROGRAM FOR CHANGING WARNING AND SHUT DOWN TRIP POINTS ON CERTAIN G3606, G3608, G3612, AND G3616 A3 ENGINES Caterpillar


PRODUCT SUPPORT PROGRAM FOR CHANGING WARNING AND SHUT DOWN TRIP POINTS ON CERTAIN G3606, G3608, G3612, AND G3616 A3 ENGINES

Usage:



REBE1289-00

28Sep2006


E310
N030
R050

 
Before/After
 (Limited distribution) 
  

PRODUCT SUPPORT PROGRAM FOR CHANGING WARNING AND SHUT DOWN TRIP POINTS ON CERTAIN G3606, G3608, G3612, AND G3616 A3 ENGINES

1213 1214 1901
PS42262
NOTE:

This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS42262" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.

NOTE:

The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.


TERMINATION DATE

30Sep2008

PROBLEM

Some G3606, G3608, G3612, and G3616 A3 Engines have had piston seizures. One root cause may be the differential between the oil temperature and the jacket water temperature.

AFFECTED PRODUCT

Model Identification Number
G3606  4ZS00325, 329-331, 342-343, 346, 348, 358, 363, 385, 397, 401
G3608  BEN00219-00220, 224-225, 232, 234-235, 240, 244, 248-249, 252, 255, 257
G3612  BKE00244-00247
G3616  BLB00211, 214-215

PARTS NEEDED

No parts needed for this program

ACTION REQUIRED

Change the warning and shut down settings for High Engine Oil to Engine Coolant Differential Temperature.

SERVICE CLAIM ALLOWANCES

Product smu/age whichever comes first
Caterpillar
Dealer Suggested
Customer Suggested
Parts %
Labor Hrs%
Parts %
Labor Hrs%
Parts %
Labor Hrs%
0-40000 hrs 
100.0%
100.0%
0.0%
0.0%
0.0%
0.0%
 NOTE: This is a 1.0-hour job



PARTS DISPOSITION

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
 
 
 


Rework Procedure


 
Connect a laptop computer to the engine control system with Cat ET.
Select the ECM monitoring screen.
Change the "High Eng Oil to Eng Coolant Differential Temp" warning to 5? C (9? F) and change the shut down to 8? C (14? F).
A factory password is required to change the shut down.
Record the ECM monitoring screen before disconnecting Cat ET.
 
 

Caterpillar Information System:

Product support program for reworking the Power Distribution Panel Harness Assembly on certain 3500B Series II Marine Propulsion engines Product support program for reworking the Power Distribution Panel Harness Assembly on certain 3500B Series II Marine Propulsion engines
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 3516B SERIES ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 3516B SERIES ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING SOFTWARE ON CERTAIN C9 ACERT MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING SOFTWARE ON CERTAIN C9 ACERT MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3512B PETROLEUM GENSET ENGINES. PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3512B PETROLEUM GENSET ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING FUEL LINES ON CERTAIN 3516B HD LOCOMOTIVE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING FUEL LINES ON CERTAIN 3516B HD LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING DRIVELINE ON CERTAIN C-18 GENERATOR SETS WITH LC6 GENERATORS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING DRIVELINE ON CERTAIN C-18 GENERATOR SETS WITH LC6 GENERATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTIAN 0R7467 CYLINDER HEADS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTIAN 0R7467 CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR INSTALLING WIRING HARNESSES FOR CERTAIN C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR INSTALLING WIRING HARNESSES FOR CERTAIN C32 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS ON CERTAIN C32 AND 3508 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS ON CERTAIN C32 AND 3508 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS FOR CERTAIN C32 AND 3500 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS FOR CERTAIN C32 AND 3500 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LUBE OIL PUMP ON CERTAIN C6.6 INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LUBE OIL PUMP ON CERTAIN C6.6 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DIRECT INJECTION FUEL NOZZLE ADAPTERS ON CERTAIN 3408 AND 3412 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DIRECT INJECTION FUEL NOZZLE ADAPTERS ON CERTAIN 3408 AND 3412 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 0R9962 CLINDER PACKS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 0R9962 CLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTON SKIRTS ON CERTAIN C12 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTON SKIRTS ON CERTAIN C12 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR FLASHING ENGINE SOFTWARE ON CERTAIN C-13 INDUSTIRAL ENGINES INSTALLED IN AGRICULTIRAL PRODUCTS PRODUCT IMPROVEMENT PROGRAM FOR FLASHING ENGINE SOFTWARE ON CERTAIN C-13 INDUSTIRAL ENGINES INSTALLED IN AGRICULTIRAL PRODUCTS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CUSTOMER E-STOP WIRING FOR CERTAIN 3500B MARINE PROPULSION ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CUSTOMER E-STOP WIRING FOR CERTAIN 3500B MARINE PROPULSION ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES. PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FAN PULLEY GROUP ON CERTAIN 3516 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FAN PULLEY GROUP ON CERTAIN 3516 GENERATOR SETS
Product Improvement Program for replacing the union in the fuel/water separator fuel line on certain C32 generator sets Product Improvement Program for replacing the union in the fuel/water separator fuel line on certain C32 generator sets
Product Improvement Program for reworking the 1U8763 Lifting Bracket Assembly. Product Improvement Program for reworking the 1U8763 Lifting Bracket Assembly.
PRODUCT SUPPORT PROGRAM FOR REPLACING AFTERCOOLERS ON C9 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING AFTERCOOLERS ON C9 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR THE REPLACEMENT OF THE LOW PRESSURE ACTURATORS FOR THE INTAKE VALVE ON CERTAIN C13 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR THE REPLACEMENT OF THE LOW PRESSURE ACTURATORS FOR THE INTAKE VALVE ON CERTAIN C13 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN CAT MESSENGER DISPLAY GROUPS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN CAT MESSENGER DISPLAY GROUPS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR INTAKE VALVE LOW PRESSURE ACTUATORS REPLACEMENT ON CERTAIN C13 TRUCK ENGINES. PRODUCT SUPPORT PROGRAM FOR INTAKE VALVE LOW PRESSURE ACTUATORS REPLACEMENT ON CERTAIN C13 TRUCK ENGINES.
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.