PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3512B PETROLEUM GENSET ENGINES. Caterpillar


PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3512B PETROLEUM GENSET ENGINES.

Usage:



REBE1226-01

18Oct2006
(Revised 27Feb2007)


U-682
A-660
D-644
O-666

 
Priority
  
  

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3512B PETROLEUM GENSET ENGINES.

1205
PI31167
NOTE:

This Program must be administered as soon as possible. When reporting the repair, use "PI31167" as the Part Number and "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. Exception: If the repair is done after failure, use "PI31167" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.

NOTE:

The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.

 
NOTE:

This Revised Service Letter replaces the October 18, 2006 Service Letter. Changes have been made to the Parts Needed and Action Required section.


COMPLETION DATE

TERMINATION DATE

30Apr2007 31Oct2007

PROBLEM

The 21" 193-3288 Damper Gp needs to be replaced on certain 3512B Petroleum Genset Engines with the 23" 1463740/">146-3740 Damper Gp. The existing 21" damper can lead to reduced damper life and may exhibit v-belt flipping issues.

AFFECTED PRODUCT

Model Identification Number
3512B  PTF00147, 157-215

PARTS NEEDED

Qty

Part Number Description
1 1463740 DAMPER GP
1 1N3482 ADAPTER

ACTION REQUIRED

This rework should be performed immediately. Allow time for the engine to cool before starting this rework.

1. Remove damper as outlined within the "Removal Procedure" in media number SENR6564.
Note: After removing the damper bolts from the unit check the bolts using the Reuse & Salvage Guide to ensure that the damper bolts taken out of the unit can be reused. Also reuse the 5P8250 washers for the damper reassembly.

2. Replace damper with the damper (part number 1463740/">146-3740), as outlined within the "Installation Procedure" within the same SENR6564 publication.

OWNER NOTIFICATION

U.S. and Canadian owners will receive the attached Owner Notification.

SERVICE CLAIM ALLOWANCES

Caterpillar
Dealer Suggested
Customer Suggested
Parts %
Labor Hrs%
Parts %
Labor Hrs%
Parts %
Labor Hrs%
100%
100%
0%
0%
0%
0%

 NOTE: This is a 3.0-hour job


PARTS DISPOSITION

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
 
 
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
 
 
 
COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS

XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999

PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP

MODELS INVOLVED - CERTAIN 3512B PETROLEUM GENSET ENGINES.

Dear Caterpillar Product Owner:

A new 23" damper needs to be installed in place of the current 21" damper on the products listed below. You will not be charged for the service performed.

Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service.

Please refer the dealer to their Service Letter dated 18Oct2006 when scheduling this service.

We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime.



Caterpillar Inc.

Identification #(s)



Attached to 18Oct2006 Service Letter

Caterpillar Information System:

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING FUEL LINES ON CERTAIN 3516B HD LOCOMOTIVE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING FUEL LINES ON CERTAIN 3516B HD LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING DRIVELINE ON CERTAIN C-18 GENERATOR SETS WITH LC6 GENERATORS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING DRIVELINE ON CERTAIN C-18 GENERATOR SETS WITH LC6 GENERATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTIAN 0R7467 CYLINDER HEADS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTIAN 0R7467 CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR INSTALLING WIRING HARNESSES FOR CERTAIN C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR INSTALLING WIRING HARNESSES FOR CERTAIN C32 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS ON CERTAIN C32 AND 3508 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS ON CERTAIN C32 AND 3508 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS FOR CERTAIN C32 AND 3500 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS FOR CERTAIN C32 AND 3500 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LUBE OIL PUMP ON CERTAIN C6.6 INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LUBE OIL PUMP ON CERTAIN C6.6 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DIRECT INJECTION FUEL NOZZLE ADAPTERS ON CERTAIN 3408 AND 3412 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DIRECT INJECTION FUEL NOZZLE ADAPTERS ON CERTAIN 3408 AND 3412 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FAN DRIVE BELTS ON CERTAIN C32 50HZ GENERATOR SET PRODUCT SUPPORT PROGRAM FOR REPLACING THE FAN DRIVE BELTS ON CERTAIN C32 50HZ GENERATOR SET
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI OIL PRESSURE SENSOR AND HEUI OIL CROSSOVER TUBES ON CERTAIN 3126A REMANUFACTURED ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI OIL PRESSURE SENSOR AND HEUI OIL CROSSOVER TUBES ON CERTAIN 3126A REMANUFACTURED ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ECM SOFTWARE ON CERTAIN C32 EPG ENGINES. PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ECM SOFTWARE ON CERTAIN C32 EPG ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING ENGINE SOFTWARE ON CERTAIN 3512B ENGINES EQUIPPED WITH ADEM 3 ENGINE CONTROL MODULES. PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING ENGINE SOFTWARE ON CERTAIN 3512B ENGINES EQUIPPED WITH ADEM 3 ENGINE CONTROL MODULES.
PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING SOFTWARE ON CERTAIN C9 ACERT MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING SOFTWARE ON CERTAIN C9 ACERT MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 3516B SERIES ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 3516B SERIES ENGINES
Product support program for reworking the Power Distribution Panel Harness Assembly on certain 3500B Series II Marine Propulsion engines Product support program for reworking the Power Distribution Panel Harness Assembly on certain 3500B Series II Marine Propulsion engines
PRODUCT SUPPORT PROGRAM FOR CHANGING WARNING AND SHUT DOWN TRIP POINTS ON CERTAIN G3606, G3608, G3612, AND G3616 A3 ENGINES PRODUCT SUPPORT PROGRAM FOR CHANGING WARNING AND SHUT DOWN TRIP POINTS ON CERTAIN G3606, G3608, G3612, AND G3616 A3 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 0R9962 CLINDER PACKS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 0R9962 CLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTON SKIRTS ON CERTAIN C12 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTON SKIRTS ON CERTAIN C12 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR FLASHING ENGINE SOFTWARE ON CERTAIN C-13 INDUSTIRAL ENGINES INSTALLED IN AGRICULTIRAL PRODUCTS PRODUCT IMPROVEMENT PROGRAM FOR FLASHING ENGINE SOFTWARE ON CERTAIN C-13 INDUSTIRAL ENGINES INSTALLED IN AGRICULTIRAL PRODUCTS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CUSTOMER E-STOP WIRING FOR CERTAIN 3500B MARINE PROPULSION ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CUSTOMER E-STOP WIRING FOR CERTAIN 3500B MARINE PROPULSION ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES. PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FAN PULLEY GROUP ON CERTAIN 3516 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FAN PULLEY GROUP ON CERTAIN 3516 GENERATOR SETS
Product Improvement Program for replacing the union in the fuel/water separator fuel line on certain C32 generator sets Product Improvement Program for replacing the union in the fuel/water separator fuel line on certain C32 generator sets
Product Improvement Program for reworking the 1U8763 Lifting Bracket Assembly. Product Improvement Program for reworking the 1U8763 Lifting Bracket Assembly.
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.