PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTIAN 0R7467 CYLINDER HEADS FROM DEALER PARTS STOCK
Usage:
REBE1164-00
Show/hide table
| 24Aug2006 |
U-599
A-582
D-571
O-581
TM-508
Show/hide table
| Parts stock action only
| PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTIAN 0R7467 CYLINDER HEADS FROM DEALER PARTS STOCK |
|
| 1101 1100 7750 | PI70205 |
|
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
TERMINATION DATE |
| 30Nov2006 |
PROBLEM
Show/hide table
| 0R7467 Heads with the date codes 16506, 17206, 17306, 17406 might not have the 4P7639 Plug and 7E-8276 Gasket installed. If these heads are installed on a engine without the plug, combustion gases will blow out the combustion relief passage in the head. |
ACTION REQUIRED
Show/hide table
| Verify that the 4P7639 Plug and 7E8276 Gasket is installed in all 0R7467 Heads with the date code 16506, 17206, 17306, 17406. If a 0R7467 Head with the date code 16506, 17206, 17306, 17406 is found to not have the plug and gasket installed, please return the head. |
SERVICE CLAIM ALLOWANCES
Show/hide table
| Submit one claim for all parts removed from dealer parts stock. |
PARTS DISPOSITION
Show/hide table
| Please return 0R7467 Heads without the 4P7639 Plug and 7E8276 Gasket to: Caterpillar Inc. 501 Cardinal Drive Corinth, MS 38834 USA ATTN: Ray Wooten |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR INSTALLING WIRING HARNESSES FOR CERTAIN C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR INSTALLING WIRING HARNESSES FOR CERTAIN C32 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS ON CERTAIN C32 AND 3508 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS ON CERTAIN C32 AND 3508 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS FOR CERTAIN C32 AND 3500 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS FOR CERTAIN C32 AND 3500 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LUBE OIL PUMP ON CERTAIN C6.6 INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LUBE OIL PUMP ON CERTAIN C6.6 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DIRECT INJECTION FUEL NOZZLE ADAPTERS ON CERTAIN 3408 AND 3412 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DIRECT INJECTION FUEL NOZZLE ADAPTERS ON CERTAIN 3408 AND 3412 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FAN DRIVE BELTS ON CERTAIN C32 50HZ GENERATOR SET PRODUCT SUPPORT PROGRAM FOR REPLACING THE FAN DRIVE BELTS ON CERTAIN C32 50HZ GENERATOR SET
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI OIL PRESSURE SENSOR AND HEUI OIL CROSSOVER TUBES ON CERTAIN 3126A REMANUFACTURED ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI OIL PRESSURE SENSOR AND HEUI OIL CROSSOVER TUBES ON CERTAIN 3126A REMANUFACTURED ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ECM SOFTWARE ON CERTAIN C32 EPG ENGINES. PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ECM SOFTWARE ON CERTAIN C32 EPG ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING ENGINE SOFTWARE ON CERTAIN 3512B ENGINES EQUIPPED WITH ADEM 3 ENGINE CONTROL MODULES. PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING ENGINE SOFTWARE ON CERTAIN 3512B ENGINES EQUIPPED WITH ADEM 3 ENGINE CONTROL MODULES.
PRODUCT SUPPORT PROGRAM FOR CHANGING FLS AND FTS SETTINGS ON CERTAIN 3412E, C30, AND C32 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR CHANGING FLS AND FTS SETTINGS ON CERTAIN 3412E, C30, AND C32 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE WATER TEMPERATURE REGULATOR ON CERTAIN C9 ON-HIGHWAY TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE WATER TEMPERATURE REGULATOR ON CERTAIN C9 ON-HIGHWAY TRUCK ENGINES
Product Improvement Program for adding vibration dampers to Air Shut Offs on certain 3500 diesel engines Product Improvement Program for adding vibration dampers to Air Shut Offs on certain 3500 diesel engines
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING DRIVELINE ON CERTAIN C-18 GENERATOR SETS WITH LC6 GENERATORS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING DRIVELINE ON CERTAIN C-18 GENERATOR SETS WITH LC6 GENERATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING FUEL LINES ON CERTAIN 3516B HD LOCOMOTIVE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING FUEL LINES ON CERTAIN 3516B HD LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3512B PETROLEUM GENSET ENGINES. PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3512B PETROLEUM GENSET ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING SOFTWARE ON CERTAIN C9 ACERT MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING SOFTWARE ON CERTAIN C9 ACERT MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 3516B SERIES ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 3516B SERIES ENGINES
Product support program for reworking the Power Distribution Panel Harness Assembly on certain 3500B Series II Marine Propulsion engines Product support program for reworking the Power Distribution Panel Harness Assembly on certain 3500B Series II Marine Propulsion engines
PRODUCT SUPPORT PROGRAM FOR CHANGING WARNING AND SHUT DOWN TRIP POINTS ON CERTAIN G3606, G3608, G3612, AND G3616 A3 ENGINES PRODUCT SUPPORT PROGRAM FOR CHANGING WARNING AND SHUT DOWN TRIP POINTS ON CERTAIN G3606, G3608, G3612, AND G3616 A3 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 0R9962 CLINDER PACKS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 0R9962 CLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTON SKIRTS ON CERTAIN C12 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTON SKIRTS ON CERTAIN C12 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR FLASHING ENGINE SOFTWARE ON CERTAIN C-13 INDUSTIRAL ENGINES INSTALLED IN AGRICULTIRAL PRODUCTS PRODUCT IMPROVEMENT PROGRAM FOR FLASHING ENGINE SOFTWARE ON CERTAIN C-13 INDUSTIRAL ENGINES INSTALLED IN AGRICULTIRAL PRODUCTS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CUSTOMER E-STOP WIRING FOR CERTAIN 3500B MARINE PROPULSION ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CUSTOMER E-STOP WIRING FOR CERTAIN 3500B MARINE PROPULSION ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES. PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.