PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI OIL PRESSURE SENSOR AND HEUI OIL CROSSOVER TUBES ON CERTAIN 3126A REMANUFACTURED ENGINES
Usage:
REBE1095-00
Show/hide table
| 24Jul2006 |
U-567
A-552
D-548
O-548
Show/hide table
| After Failure Only | PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI OIL PRESSURE SENSOR AND HEUI OIL CROSSOVER TUBES ON CERTAIN 3126A REMANUFACTURED ENGINES |
|
| 7494 1307 1714 1925 | PS51215 |
|
Show/hide table
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS51215" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Jul2008 |
PROBLEM
Show/hide table
| In extreme operating conditions, pressure pulses generated by the 135-5980 HEUI oil crossover tube, may cause the 1671709/">167-1709 HEUI oil pressure sensor and/or the 135-5980 HEUI oil crossover tube to fail. If the sensor fails, the result will be a 164 error code in the ECM and the engine may also shut down or run erratic. A high pitched squealing may also be heard and cracks may also be found in the 135-5980 HEUI oil crossover tube. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 3126 | 6RW00122-00355, 357-1527, 1529-1531 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 6 | 1480876 | FITTING (TUNED) |
| 6 | 1640201 | TUBE AS |
| 1 | 1671709 | SENSOR GP-PRESS |
ACTION REQUIRED
Show/hide table
| Remove the six 135-5980 HEUI oil crossover tubes, six 113-6135 orifices and the 1671709/">167-1709 HEUI oil pressure sensor. Install six 164-0201 HEUI oil crossover tubes, six 148-0876 orifices and a new 1671709/">167-1709 HEUI oil pressure sensor. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-24 mo |
||||||
Show/hide table
| NOTE: This is a 4.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Please return 135-5980 HEUI oil crossover tube to the address listed and attention David Torok. Corinth Manufacturing Facility, 501 Cardinal Drive, Corinth, MS 38834 |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ECM SOFTWARE ON CERTAIN C32 EPG ENGINES. PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ECM SOFTWARE ON CERTAIN C32 EPG ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING ENGINE SOFTWARE ON CERTAIN 3512B ENGINES EQUIPPED WITH ADEM 3 ENGINE CONTROL MODULES. PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING ENGINE SOFTWARE ON CERTAIN 3512B ENGINES EQUIPPED WITH ADEM 3 ENGINE CONTROL MODULES.
PRODUCT SUPPORT PROGRAM FOR CHANGING FLS AND FTS SETTINGS ON CERTAIN 3412E, C30, AND C32 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR CHANGING FLS AND FTS SETTINGS ON CERTAIN 3412E, C30, AND C32 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE WATER TEMPERATURE REGULATOR ON CERTAIN C9 ON-HIGHWAY TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE WATER TEMPERATURE REGULATOR ON CERTAIN C9 ON-HIGHWAY TRUCK ENGINES
Product Improvement Program for adding vibration dampers to Air Shut Offs on certain 3500 diesel engines Product Improvement Program for adding vibration dampers to Air Shut Offs on certain 3500 diesel engines
Product Improvement Program to relocate limit switches and add vibration dampers to the Air Shut Offs(ASOs) on certain 3500 diesel engines. Product Improvement Program to relocate limit switches and add vibration dampers to the Air Shut Offs(ASOs) on certain 3500 diesel engines.
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3508B GENERATOR SET ENGINES. PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3508B GENERATOR SET ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING THE SOFTWARE (FLASH FILE) ON CERTAIN C9 ACERT MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING THE SOFTWARE (FLASH FILE) ON CERTAIN C9 ACERT MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BRAIDED POWER CABLES ON CERTAIN C18 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BRAIDED POWER CABLES ON CERTAIN C18 GENERATOR SETS
Product Improvment Program for replacing the braided power cabling on certain C18 Generartor Sets Product Improvment Program for replacing the braided power cabling on certain C18 Generartor Sets
PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING ENGINE SOFTWARE FOR CERTAIN C15 TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING ENGINE SOFTWARE FOR CERTAIN C15 TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FAN DRIVE BELTS ON CERTAIN C32 50HZ GENERATOR SET PRODUCT SUPPORT PROGRAM FOR REPLACING THE FAN DRIVE BELTS ON CERTAIN C32 50HZ GENERATOR SET
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DIRECT INJECTION FUEL NOZZLE ADAPTERS ON CERTAIN 3408 AND 3412 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DIRECT INJECTION FUEL NOZZLE ADAPTERS ON CERTAIN 3408 AND 3412 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LUBE OIL PUMP ON CERTAIN C6.6 INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LUBE OIL PUMP ON CERTAIN C6.6 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS FOR CERTAIN C32 AND 3500 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS FOR CERTAIN C32 AND 3500 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS ON CERTAIN C32 AND 3508 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS ON CERTAIN C32 AND 3508 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR INSTALLING WIRING HARNESSES FOR CERTAIN C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR INSTALLING WIRING HARNESSES FOR CERTAIN C32 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTIAN 0R7467 CYLINDER HEADS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTIAN 0R7467 CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING DRIVELINE ON CERTAIN C-18 GENERATOR SETS WITH LC6 GENERATORS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING DRIVELINE ON CERTAIN C-18 GENERATOR SETS WITH LC6 GENERATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING FUEL LINES ON CERTAIN 3516B HD LOCOMOTIVE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING FUEL LINES ON CERTAIN 3516B HD LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3512B PETROLEUM GENSET ENGINES. PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3512B PETROLEUM GENSET ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING SOFTWARE ON CERTAIN C9 ACERT MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING SOFTWARE ON CERTAIN C9 ACERT MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 3516B SERIES ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 3516B SERIES ENGINES