PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3508B GENERATOR SET ENGINES.
Usage:
REBE1054-01
Show/hide table
| 08Nov2006 |
| (Revised 27Feb2007) |
A-690
D-677
O-703
Show/hide table
| Priority | PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3508B GENERATOR SET ENGINES. |
|
| 1205 | PI31182 |
|
Show/hide table
| NOTE: | This Program must be administered as soon as possible. When reporting the repair, use "PI31182" as the Part Number and "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. Exception: If the repair is done after failure, use "PI31182" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
| NOTE: | This Revised Service Letter replaces the November 8, 2006 Service Letter. Changes have been made to the Parts Needed, Action Required, and Rework Procedure section. |
Show/hide table
COMPLETION DATE |
TERMINATION DATE |
| 31May2007 | 30Nov2007 |
PROBLEM
Show/hide table
| The 21" 193-3288 Damper Group needs to be replaced on certain 3508B Genset Engines with the 23" 1463740/">146-3740 Damper Gp. The 21" 193-3288 Damper Group can lead to reduced damper life and may exhibit v-belt flipping issues. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 3508B | CNB01507, 1512-1514, 1516-1517, 1523-1528, 1532-1537, 1549-1551, 1574, 1585-1588, 1590-1592, 1604, 1608, 1612-1613, 1615-1616, 1625-1629, 1631-1633, 1635-1638, 1643-1644, 1647-1650, 1666-1668, 1670-1686, 1689, 1693-1695, 1702, 1714-1717, 1728-1742, 1744, 1747-1752 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 1463740 | DAMPER GP |
| 1 | 1N3482 | ADAPTER |
ACTION REQUIRED
Show/hide table
| 1. Remove 193-3288 Damper Gp. as outlined within the "Removal Procedure" in media number SENR6564. Note: After removing the damper bolts from the unit check the bolts using the Reuse & Salvage Guide to ensure that the damper bolts taken out of the unit can be reused. Also reuse the 5P8250 washers for the damper reassembly. 2. Install 1463740/">146-3740 Damper Gp. as outlined within the "Installation Procedure" within the same SENR6564 publication. |
Show/hide table
OWNER NOTIFICATION
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
Show/hide table
| NOTE: This is a 3.0-hour job | |||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
| MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE. |
Show/hide table
| COPY OF OWNER NOTIFICATION FOR EUROPEAN & ASIA PACIFIC OWNERS XYZ Corporation 3240 Arrow Drive Anywhere, YZ 99999 PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP MODELS INVOLVED - CERTAIN 3508B GENERATOR SET ENGINES Dear Caterpillar Product Owner: High torsional vibration issues have been found on the products listed below. Some of these engines are experiencing a belt flipping symptom associated with this torsional vibration. A larger 23" damper needs to be installed on the products listed below. You will not be charged for the service performed. Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. Please refer the dealer to their Service Letter dated 08Nov2006 when scheduling this service. We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime. Caterpillar Inc. Identification #(s) Attached to 08Nov2006 Service Letter |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING THE SOFTWARE (FLASH FILE) ON CERTAIN C9 ACERT MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING THE SOFTWARE (FLASH FILE) ON CERTAIN C9 ACERT MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BRAIDED POWER CABLES ON CERTAIN C18 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BRAIDED POWER CABLES ON CERTAIN C18 GENERATOR SETS
Product Improvment Program for replacing the braided power cabling on certain C18 Generartor Sets Product Improvment Program for replacing the braided power cabling on certain C18 Generartor Sets
PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING ENGINE SOFTWARE FOR CERTAIN C15 TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING ENGINE SOFTWARE FOR CERTAIN C15 TRUCK ENGINES
PRODUCT IMPROVMENT PROGRAM FOR REFLASHING ENGINE SOFTWARE ON CERTAIN DV-3126E TRUCK ENGINES PRODUCT IMPROVMENT PROGRAM FOR REFLASHING ENGINE SOFTWARE ON CERTAIN DV-3126E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING THE AIR AND FUEL ACTUATORS ON CERTAIN G3516 ENGINES PRODUCT SUPPORT PROGRAM FOR INSPECTING THE AIR AND FUEL ACTUATORS ON CERTAIN G3516 ENGINES
Product support program to replace generator voltage regulators producing no voltage, that are subject to high humidity on 3406C, 3456, and C18 Generator Sets. Product support program to replace generator voltage regulators producing no voltage, that are subject to high humidity on 3406C, 3456, and C18 Generator Sets.
Product Improvement program for Removing all 242-3958 voltage regulators from dealer part stock. Product Improvement program for Removing all 242-3958 voltage regulators from dealer part stock.
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TRANSMISSION PRESSURE SENSOR ON CERTAIN C9 ACERT MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TRANSMISSION PRESSURE SENSOR ON CERTAIN C9 ACERT MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBO EXHAUST HOUSINGS FOR CERTAIN C12 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING TURBO EXHAUST HOUSINGS FOR CERTAIN C12 MARINE ENGINES
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
3192 MARINE GEAR Planetary Reduction Gears
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product Improvement Program to relocate limit switches and add vibration dampers to the Air Shut Offs(ASOs) on certain 3500 diesel engines. Product Improvement Program to relocate limit switches and add vibration dampers to the Air Shut Offs(ASOs) on certain 3500 diesel engines.
Product Improvement Program for adding vibration dampers to Air Shut Offs on certain 3500 diesel engines Product Improvement Program for adding vibration dampers to Air Shut Offs on certain 3500 diesel engines
PRODUCT SUPPORT PROGRAM FOR REPLACING THE WATER TEMPERATURE REGULATOR ON CERTAIN C9 ON-HIGHWAY TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE WATER TEMPERATURE REGULATOR ON CERTAIN C9 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR CHANGING FLS AND FTS SETTINGS ON CERTAIN 3412E, C30, AND C32 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR CHANGING FLS AND FTS SETTINGS ON CERTAIN 3412E, C30, AND C32 MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING ENGINE SOFTWARE ON CERTAIN 3512B ENGINES EQUIPPED WITH ADEM 3 ENGINE CONTROL MODULES. PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING ENGINE SOFTWARE ON CERTAIN 3512B ENGINES EQUIPPED WITH ADEM 3 ENGINE CONTROL MODULES.
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ECM SOFTWARE ON CERTAIN C32 EPG ENGINES. PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ECM SOFTWARE ON CERTAIN C32 EPG ENGINES.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI OIL PRESSURE SENSOR AND HEUI OIL CROSSOVER TUBES ON CERTAIN 3126A REMANUFACTURED ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI OIL PRESSURE SENSOR AND HEUI OIL CROSSOVER TUBES ON CERTAIN 3126A REMANUFACTURED ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FAN DRIVE BELTS ON CERTAIN C32 50HZ GENERATOR SET PRODUCT SUPPORT PROGRAM FOR REPLACING THE FAN DRIVE BELTS ON CERTAIN C32 50HZ GENERATOR SET
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DIRECT INJECTION FUEL NOZZLE ADAPTERS ON CERTAIN 3408 AND 3412 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DIRECT INJECTION FUEL NOZZLE ADAPTERS ON CERTAIN 3408 AND 3412 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LUBE OIL PUMP ON CERTAIN C6.6 INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LUBE OIL PUMP ON CERTAIN C6.6 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS FOR CERTAIN C32 AND 3500 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS FOR CERTAIN C32 AND 3500 GENERATOR SETS