Interference Between Cable Assembly and Hydraulic Fan Case Drain Hose Assembly May Occur on Certain 793D Off-Highway Trucks {1408, 5057} Caterpillar


Interference Between Cable Assembly and Hydraulic Fan Case Drain Hose Assembly May Occur on Certain 793D Off-Highway Trucks {1408, 5057}

Usage:

793D FDB
Off-Highway Truck/Tractor
793D (S/N: FDB1-UP)

Introduction

The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.

Problem



Illustration 1g06422088
(A) 451-1099 Cable As
(B) 375-5399 Hose As

Cable assembly (A) from the alternator terminal may interfere with hose assembly (B) which will lead to hydraulic hose failure on the machines listed above. This issue may also occur in machines with 437-0125 Charging Alternator Gp.

Solution

------ WARNING! ------

Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.




Illustration 2g06427215
(A) 451-1099 Cable As
(B) 375-5399 Hose As

Caterpillar is aware of this problem and recommends the following interim corrective action.

Inspect for interferences between 451-1099 Cable As and 375-5399 Hose As.

If there is any interference found, rotate ring terminal on positive alternator terminal to eliminate interference.

In the event of failure, replace the damaged 451-1099 Cable As with the same part.

In the event of failure, replace the damaged 375-5399 Hose As with the same part.

Until a permanent corrective action (PCA) is available, inspect regularly scheduled maintenance to ensure that the interference does not reoccur.

Caterpillar Information System:

794 AC Off-Highway Truck Field Assembly Platform - Install - Superstructure
B1, B2, B4, B6 and B8 Hydraulic Hammers Head Nuts - Tighten
New Collar and Longer Screw Hardware Improvement is Now Available for RS400 Rotation Sensor on Certain Motor Graders {1408} New Collar and Longer Screw Hardware Improvement is Now Available for RS400 Rotation Sensor on Certain Motor Graders {1408}
A Rework Procedure Is Now Available for Providing More Lubrication to the Transmission Clutch Number Three on Certain 700 Series Articulated Trucks {3030, 3160} A Rework Procedure Is Now Available for Providing More Lubrication to the Transmission Clutch Number Three on Certain 700 Series Articulated Trucks {3030, 3160}
New Air Cleaner Kit Is Now Available for Certain 836K Landfill Compactors {0679, 1051, 1071, 1408} New Air Cleaner Kit Is Now Available for Certain 836K Landfill Compactors {0679, 1051, 1071, 1408}
521B and 522B Track Feller Bunchers Tilt Platform Stabilizer - Inspect/Adjust
725C2 and 730C2 Articulated Truck Machine System Sensor - Remove and Install - Payload
A New Special Instruction Is Now Used to Rework the Weld Crack on A-Pin Doubler Plate for Certain 966L, 966M, 972L, and 972M Medium Wheel Loaders {0679, 7054} A New Special Instruction Is Now Used to Rework the Weld Crack on A-Pin Doubler Plate for Certain 966L, 966M, 972L, and 972M Medium Wheel Loaders {0679, 7054}
Payload Harness Grommets Are Now Installed on Certain 700 Series Articulated Trucks {1408, 7150} Payload Harness Grommets Are Now Installed on Certain 700 Series Articulated Trucks {1408, 7150}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129} Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
New Engine Software for Certain C7.1 Engines {1920} New Engine Software for Certain C7.1 Engines {1920}
Governor Pedal Group or Cable Assembly for the Engine May Stick on Certain Backhoe Loaders {1265} Governor Pedal Group or Cable Assembly for the Engine May Stick on Certain Backhoe Loaders {1265}
CX38 CL6 Top Hat Rework Conversion of Assemblies 367-9371 to 490-8824 {3030, 3160} CX38 CL6 Top Hat Rework Conversion of Assemblies 367-9371 to 490-8824 {3030, 3160}
HFW221 Felling Head Maintenance Interval Schedule
Inspection of the Rear of the Engine on Certain C4.4 Machine Engines {1201} Inspection of the Rear of the Engine on Certain C4.4 Machine Engines {1201}
New Turbo Outlet Hose Is Now Used on Certain 815K Soil Compactors and 816K Landfill Compactors {1071} New Turbo Outlet Hose Is Now Used on Certain 815K Soil Compactors and 816K Landfill Compactors {1071}
New Air To Air After Cooler (ATAAC) Core Mount Is Now Used on Certain 815K Soil Compactors and 816K Landfill Compactors {1063} New Air To Air After Cooler (ATAAC) Core Mount Is Now Used on Certain 815K Soil Compactors and 816K Landfill Compactors {1063}
New Lamp Group Flood Lights Are Now Used on Certain L Series and M Series Medium Wheel Loaders {1429, 1430, 1434} New Lamp Group Flood Lights Are Now Used on Certain L Series and M Series Medium Wheel Loaders {1429, 1430, 1434}
Improved Axle Shaft is Now Used on Certain 826K Landfill Compactors {3278} Improved Axle Shaft is Now Used on Certain 826K Landfill Compactors {3278}
HFW221 Felling Head Specifications
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453} Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
High-Pressure Fuel Pump Adapter and Front Gear Inspection for Certain C175–16 and C175–20 Engines {1242, 125H} High-Pressure Fuel Pump Adapter and Front Gear Inspection for Certain C175–16 and C175–20 Engines {1242, 125H}
Transmission Clutch Failure May Occur on Certain 793F Off-Highway Trucks {3030, 3160} Transmission Clutch Failure May Occur on Certain 793F Off-Highway Trucks {3030, 3160}
New Pre-Cleaner Hose Is Now Used on Certain 24 Motor Graders {7320} New Pre-Cleaner Hose Is Now Used on Certain 24 Motor Graders {7320}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.