A New Special Instruction Is Now Used to Rework the Weld Crack on A-Pin Doubler Plate for Certain 966L, 966M, 972L, and 972M Medium Wheel Loaders {0679, 7054} Caterpillar


A New Special Instruction Is Now Used to Rework the Weld Crack on A-Pin Doubler Plate for Certain 966L, 966M, 972L, and 972M Medium Wheel Loaders {0679, 7054}

Usage:

972M A78
Wheel Loader
966L (S/N: FSL1-10685; FRS1-1961)
966M (S/N: MD71-193; EJA1-3181; DYC1-1387; R8D1-1253; LMM1-10386; KJP1-2977; L8R1-10271; GMS1-598)
966M Series XE (S/N: FL21-925; P6C1-1136; DZL1-289; B8P1-500; XCR1-333)
972L (S/N: RFB1-1412; YJW1-10241)
972M (S/N: A781-354; L8E1-1228; LSJ1-2602; GGN1-10279; WGN1-191; A8P1-1806; JPR1-959; M8W1-10265)
972M Series XE (S/N: AN31-356; L9S1-736; M5S1-365; EDW1-903; R1Z1-288)

Reference: Special Instruction, M0099851, "Rework Procedure for Weld Crack on A-Pin Doubler Plate for Certain 966L, 966M, 972L, and 972M Medium Wheel Loaders"

Description Of Change: A procedure to rework the weld crack on A-pin doubler plate is now used on the machines listed above. The rework procedure contains information to rework the weld crack on A-pin doubler plate and enhances the strength to resist the working stress.

Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.

For complete procedure, parts, and tools required to rework the weld crack on A-pin doubler plate, refer to Special Instruction, M0099851, "Rework Procedure for Weld Crack on A-Pin Doubler Plate for Certain 966L, 966M, 972L, and 972M Medium Wheel Loaders".

The special instruction is available through the normal literature distribution system. The publication can also be found on the Caterpillar Service Information System (SIS).

Caterpillar Information System:

Payload Harness Grommets Are Now Installed on Certain 700 Series Articulated Trucks {1408, 7150} Payload Harness Grommets Are Now Installed on Certain 700 Series Articulated Trucks {1408, 7150}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129} Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
New Engine Software for Certain C7.1 Engines {1920} New Engine Software for Certain C7.1 Engines {1920}
Governor Pedal Group or Cable Assembly for the Engine May Stick on Certain Backhoe Loaders {1265} Governor Pedal Group or Cable Assembly for the Engine May Stick on Certain Backhoe Loaders {1265}
New Machine Software Groups are Now Used on Certain Telehandlers {7610, 7620} New Machine Software Groups are Now Used on Certain Telehandlers {7610, 7620}
Air Bubbles Can Be Visible on Films Applied on Certain Material Handlers and Wheeled Excavators {7405, 7557} Air Bubbles Can Be Visible on Films Applied on Certain Material Handlers and Wheeled Excavators {7405, 7557}
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161} New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
Identifying Oil Leaks on Certain 3500 Mining Machine Engines {1151, 1348} Identifying Oil Leaks on Certain 3500 Mining Machine Engines {1151, 1348}
An Improved Fuel Injector is Now Used on Certain C9.3 Machine Engines {1251, 1254, 1290, 1713} An Improved Fuel Injector is Now Used on Certain C9.3 Machine Engines {1251, 1254, 1290, 1713}
New Hard Washers are Used for the Mounting Hardware on the Oil Scavenge Pump for Certain C175 Off-Highway Truck Engines {1312} New Hard Washers are Used for the Mounting Hardware on the Oil Scavenge Pump for Certain C175 Off-Highway Truck Engines {1312}
An Improved Cooling System Venting Procedure is Now Available in the Operation and Maintenance Manual for Certain C175 Off-Highway Truck Engines {0374, 1350} An Improved Cooling System Venting Procedure is Now Available in the Operation and Maintenance Manual for Certain C175 Off-Highway Truck Engines {0374, 1350}
Premature Nose-Cone and King-Pin Wear May Occur on Certain 794, 796, and 798 Off-Highway Trucks {3260, 4314} Premature Nose-Cone and King-Pin Wear May Occur on Certain 794, 796, and 798 Off-Highway Trucks {3260, 4314}
725C2 and 730C2 Articulated Truck Machine System Sensor - Remove and Install - Payload
521B and 522B Track Feller Bunchers Tilt Platform Stabilizer - Inspect/Adjust
New Air Cleaner Kit Is Now Available for Certain 836K Landfill Compactors {0679, 1051, 1071, 1408} New Air Cleaner Kit Is Now Available for Certain 836K Landfill Compactors {0679, 1051, 1071, 1408}
A Rework Procedure Is Now Available for Providing More Lubrication to the Transmission Clutch Number Three on Certain 700 Series Articulated Trucks {3030, 3160} A Rework Procedure Is Now Available for Providing More Lubrication to the Transmission Clutch Number Three on Certain 700 Series Articulated Trucks {3030, 3160}
New Collar and Longer Screw Hardware Improvement is Now Available for RS400 Rotation Sensor on Certain Motor Graders {1408} New Collar and Longer Screw Hardware Improvement is Now Available for RS400 Rotation Sensor on Certain Motor Graders {1408}
B1, B2, B4, B6 and B8 Hydraulic Hammers Head Nuts - Tighten
794 AC Off-Highway Truck Field Assembly Platform - Install - Superstructure
Interference Between Cable Assembly and Hydraulic Fan Case Drain Hose Assembly May Occur on Certain 793D Off-Highway Trucks {1408, 5057} Interference Between Cable Assembly and Hydraulic Fan Case Drain Hose Assembly May Occur on Certain 793D Off-Highway Trucks {1408, 5057}
CX38 CL6 Top Hat Rework Conversion of Assemblies 367-9371 to 490-8824 {3030, 3160} CX38 CL6 Top Hat Rework Conversion of Assemblies 367-9371 to 490-8824 {3030, 3160}
HFW221 Felling Head Maintenance Interval Schedule
Inspection of the Rear of the Engine on Certain C4.4 Machine Engines {1201} Inspection of the Rear of the Engine on Certain C4.4 Machine Engines {1201}
New Turbo Outlet Hose Is Now Used on Certain 815K Soil Compactors and 816K Landfill Compactors {1071} New Turbo Outlet Hose Is Now Used on Certain 815K Soil Compactors and 816K Landfill Compactors {1071}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.