Payload Harness Grommets Are Now Installed on Certain 700 Series Articulated Trucks {1408, 7150}
- Articulated Truck
- 730 (S/N: 3F31-345; 3T31-614)
- 730 EJECTOR (S/N: 3F41-1)
- 735 (S/N: 3F51-1; 3T51-211)
- 740 EJECTOR (S/N: 3F71-275; 3T7163-174)
- 740 GC (S/N: 3T845-117)
- 745 (S/N: 3F6263-1143; 3T61-1155; JHX90105-90105)
- 730 EJECTOR (S/N: 3F41-1)
Description Of Change: Payload harness grommets are now installed on the machines listed above. The new grommets will improve the service life of the stoneguard clusters.
Adaptable To: 9X-7345 Grommet is adaptable to the products within the listed serial numbers, and is effective with all products after the listed serial numbers.
Show/hide table
Required Part | |||
---|---|---|---|
Item | Qty | Part Number | Part Name |
1 | 4 | Grommet |
Show/hide table
Illustration 1 | g06420244 |
(1) |
Caterpillar Information System:
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129} Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
New Engine Software for Certain C7.1 Engines {1920} New Engine Software for Certain C7.1 Engines {1920}
Governor Pedal Group or Cable Assembly for the Engine May Stick on Certain Backhoe Loaders {1265} Governor Pedal Group or Cable Assembly for the Engine May Stick on Certain Backhoe Loaders {1265}
New Machine Software Groups are Now Used on Certain Telehandlers {7610, 7620} New Machine Software Groups are Now Used on Certain Telehandlers {7610, 7620}
Air Bubbles Can Be Visible on Films Applied on Certain Material Handlers and Wheeled Excavators {7405, 7557} Air Bubbles Can Be Visible on Films Applied on Certain Material Handlers and Wheeled Excavators {7405, 7557}
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161} New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
Identifying Oil Leaks on Certain 3500 Mining Machine Engines {1151, 1348} Identifying Oil Leaks on Certain 3500 Mining Machine Engines {1151, 1348}
An Improved Fuel Injector is Now Used on Certain C9.3 Machine Engines {1251, 1254, 1290, 1713} An Improved Fuel Injector is Now Used on Certain C9.3 Machine Engines {1251, 1254, 1290, 1713}
New Hard Washers are Used for the Mounting Hardware on the Oil Scavenge Pump for Certain C175 Off-Highway Truck Engines {1312} New Hard Washers are Used for the Mounting Hardware on the Oil Scavenge Pump for Certain C175 Off-Highway Truck Engines {1312}
An Improved Cooling System Venting Procedure is Now Available in the Operation and Maintenance Manual for Certain C175 Off-Highway Truck Engines {0374, 1350} An Improved Cooling System Venting Procedure is Now Available in the Operation and Maintenance Manual for Certain C175 Off-Highway Truck Engines {0374, 1350}
Premature Nose-Cone and King-Pin Wear May Occur on Certain 794, 796, and 798 Off-Highway Trucks {3260, 4314} Premature Nose-Cone and King-Pin Wear May Occur on Certain 794, 796, and 798 Off-Highway Trucks {3260, 4314}
Body May Interfere with Mud Guard at Rear of Left Fender Group {4220, 7252} Body May Interfere with Mud Guard at Rear of Left Fender Group {4220, 7252}
A New Special Instruction Is Now Used to Rework the Weld Crack on A-Pin Doubler Plate for Certain 966L, 966M, 972L, and 972M Medium Wheel Loaders {0679, 7054} A New Special Instruction Is Now Used to Rework the Weld Crack on A-Pin Doubler Plate for Certain 966L, 966M, 972L, and 972M Medium Wheel Loaders {0679, 7054}
725C2 and 730C2 Articulated Truck Machine System Sensor - Remove and Install - Payload
521B and 522B Track Feller Bunchers Tilt Platform Stabilizer - Inspect/Adjust
New Air Cleaner Kit Is Now Available for Certain 836K Landfill Compactors {0679, 1051, 1071, 1408} New Air Cleaner Kit Is Now Available for Certain 836K Landfill Compactors {0679, 1051, 1071, 1408}
A Rework Procedure Is Now Available for Providing More Lubrication to the Transmission Clutch Number Three on Certain 700 Series Articulated Trucks {3030, 3160} A Rework Procedure Is Now Available for Providing More Lubrication to the Transmission Clutch Number Three on Certain 700 Series Articulated Trucks {3030, 3160}
New Collar and Longer Screw Hardware Improvement is Now Available for RS400 Rotation Sensor on Certain Motor Graders {1408} New Collar and Longer Screw Hardware Improvement is Now Available for RS400 Rotation Sensor on Certain Motor Graders {1408}
B1, B2, B4, B6 and B8 Hydraulic Hammers Head Nuts - Tighten
794 AC Off-Highway Truck Field Assembly Platform - Install - Superstructure
Interference Between Cable Assembly and Hydraulic Fan Case Drain Hose Assembly May Occur on Certain 793D Off-Highway Trucks {1408, 5057} Interference Between Cable Assembly and Hydraulic Fan Case Drain Hose Assembly May Occur on Certain 793D Off-Highway Trucks {1408, 5057}
CX38 CL6 Top Hat Rework Conversion of Assemblies 367-9371 to 490-8824 {3030, 3160} CX38 CL6 Top Hat Rework Conversion of Assemblies 367-9371 to 490-8824 {3030, 3160}
HFW221 Felling Head Maintenance Interval Schedule
Inspection of the Rear of the Engine on Certain C4.4 Machine Engines {1201} Inspection of the Rear of the Engine on Certain C4.4 Machine Engines {1201}