New Improved Fuel Level Sensor Assembly is Now Used on Certain Generator Sets and Power Modules {1439, 7481} Caterpillar


New Improved Fuel Level Sensor Assembly is Now Used on Certain Generator Sets and Power Modules {1439, 7481}

Usage:

C27 N1B
Generator Set
C27 GEN SET (S/N: N1B152-371)
Power Module
PM3516 (S/N: NBR653-952)

Description Of Change: The new improved sensor has better seal design that aids in preventing fuel ingress. The new sensor do not require any rework or programming.

Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.

The new and former part numbers are listed in Table 1.

Table 1
Required Parts 
Qty  New Part Number  Part Name  Former Part Number(1) 
569-9993  Fuel Level Sensor As  425-4307 
(1) The former part number listed is for reference only and may differ.

Caterpillar Information System:

140 Motor Grader Machine Systems Steering Accumulator - Remove and Install
The Wiper Motor May Fail on Certain Next Generation Hydraulic Excavators {7305} The Wiper Motor May Fail on Certain Next Generation Hydraulic Excavators {7305}
Commissioning Procedure for 794 AC, 796 AC, and 798 AC Off-Highway Trucks is Updated {1000, 7000, 7961} Commissioning Procedure for 794 AC, 796 AC, and 798 AC Off-Highway Trucks is Updated {1000, 7000, 7961}
The Dosing Cabinet and Clean Emissions Module for the Retrofit Aftertreatment is Discontinued {108X} The Dosing Cabinet and Clean Emissions Module for the Retrofit Aftertreatment is Discontinued {108X}
A New Crankcase Breather Assembly Clamp is Now Used for Certain C175 Commercial Engines {1317} A New Crankcase Breather Assembly Clamp is Now Used for Certain C175 Commercial Engines {1317}
New Coolant Lines for Pump Electronic Tank Unit (PETU) are Now Used on Certain Off-Highway Trucks {108U, 1380} New Coolant Lines for Pump Electronic Tank Unit (PETU) are Now Used on Certain Off-Highway Trucks {108U, 1380}
320 GC, 320 and 323 Excavator Machine Systems Specifications Swing Motor
Rain Gutter Panel Support May Be Installed Upside Down On Certain Generator Sets {7263, 7274} Rain Gutter Panel Support May Be Installed Upside Down On Certain Generator Sets {7263, 7274}
Fogging May Appear Inside Monitor On Certain Mini Hydraulic Excavators {7490} Fogging May Appear Inside Monitor On Certain Mini Hydraulic Excavators {7490}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453} Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453} Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
New Control and Panel Harness Assemblies are Now Used on Certain Cat® Engines {1408} New Control and Panel Harness Assemblies are Now Used on Certain Cat® Engines {1408}
Box Handling and Storage of Cat® PVT 110 and PVT 110 ARC Photo Voltaic Module {1471} Box Handling and Storage of Cat® PVT 110 and PVT 110 ARC Photo Voltaic Module {1471}
Adding the Jacket Water Coolant Pressure Monitor to the Digital Control Unit {191W, 7451} Adding the Jacket Water Coolant Pressure Monitor to the Digital Control Unit {191W, 7451}
Troubleshooting Procedure is Now Available for Water In Liquid Level Sensor on Certain Excavators {7422} Troubleshooting Procedure is Now Available for Water In Liquid Level Sensor on Certain Excavators {7422}
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System General Calibration Information - Cat ET
A 337-2 Code Will Not Reset on Certain C32 and 3500 Generator Sets with ADEM III Electronic Control Modules {1901} A 337-2 Code Will Not Reset on Certain C32 and 3500 Generator Sets with ADEM III Electronic Control Modules {1901}
Improved Vent Fan is Now Used on Certain Generator Sets {4450} Improved Vent Fan is Now Used on Certain Generator Sets {4450}
Channel 1 Videos for Certain Large Off-Highway Trucks are Now Available {0374, 7000} Channel 1 Videos for Certain Large Off-Highway Trucks are Now Available {0374, 7000}
Intermittent and Startup Satellite Connection Issues May Occur on Certain MS952 and MS955 Global Navigational Satellite System (GNSS) Receivers {1408, 7010, 7606, 7620} Intermittent and Startup Satellite Connection Issues May Occur on Certain MS952 and MS955 Global Navigational Satellite System (GNSS) Receivers {1408, 7010, 7606, 7620}
Use Proper Tooling And Torque When Servicing Fuel Injection Lines {0701, 1252} Use Proper Tooling And Torque When Servicing Fuel Injection Lines {0701, 1252}
Generator Rear Bearing Grease Tube Group May Get Plugged on Certain 3516 Series Engines {4471} Generator Rear Bearing Grease Tube Group May Get Plugged on Certain 3516 Series Engines {4471}
The Serpentine Belt May Fail on Certain 320, 320 GCand 323 Excavators {1405} The Serpentine Belt May Fail on Certain 320, 320 GCand 323 Excavators {1405}
A New Transmission Arrangement for 797F Off-Highway Trucks is Now Available {1408, 3030, 3160, 3168} A New Transmission Arrangement for 797F Off-Highway Trucks is Now Available {1408, 3030, 3160, 3168}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.