Swing Motor
Show/hide table
| |
| Illustration 1 | g06404261 |
Show/hide table
| NOTICE |
|---|
|
To prevent damage to the motor, the case must be filled with hydraulic oil at least to the fill port before the motor is operated. |
Show/hide table
| Item | Qty | Part | Specification Description |
| 1 | 20 | 126-2055 Spring | Free length is |
| 2 | 1 | 371-7201 Plug | Tighten to |
| 3 | 4 | 8T-1158 Bolt | Tighten to |
| 4 | 2 | 170-9996 Plug | Tighten to |
| 5 | 4 | 7Y-5221 Bolt | Tighten to |
| 6 | 2 | 170-9986 Spring | Free length is |
| 7 | 1 | 515-6104 Relief Valve As | Tighten to |
| 8 | 2 | 446-7230 Plug | Tighten to |
Caterpillar Information System:
Rain Gutter Panel Support May Be Installed Upside Down On Certain Generator Sets {7263, 7274} Rain Gutter Panel Support May Be Installed Upside Down On Certain Generator Sets {7263, 7274}
Fogging May Appear Inside Monitor On Certain Mini Hydraulic Excavators {7490} Fogging May Appear Inside Monitor On Certain Mini Hydraulic Excavators {7490}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453} Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453} Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
New Control and Panel Harness Assemblies are Now Used on Certain Cat® Engines {1408} New Control and Panel Harness Assemblies are Now Used on Certain Cat® Engines {1408}
Drive End Bearing Service For 50/75 Amp Brushless Alternators {1405} Drive End Bearing Service For 50/75 Amp Brushless Alternators {1405}
Updated Wiring Configuration is Now Used on Certain 3412 Generator Sets {1404} Updated Wiring Configuration is Now Used on Certain 3412 Generator Sets {1404}
Exhaust Rain Cap is Now Repositioned on Certain C7.1 Generator Set Engines {1072} Exhaust Rain Cap is Now Repositioned on Certain C7.1 Generator Set Engines {1072}
26SI Reman Charging Alternator Group Has Been Discontinued {1405} 26SI Reman Charging Alternator Group Has Been Discontinued {1405}
Water Couplings Can Be Damaged from Over Torquing on Certain C175 Engines {1380} Water Couplings Can Be Damaged from Over Torquing on Certain C175 Engines {1380}
Preservation Procedure for Intake System Is Now Used on Certain Cat® Engines {1052, 1053, 1201, 1216} Preservation Procedure for Intake System Is Now Used on Certain Cat® Engines {1052, 1053, 1201, 1216}
A False 1684-12 Code May Trip on Certain Tier 4 C175 Off-Highway Truck Engines {125H} A False 1684-12 Code May Trip on Certain Tier 4 C175 Off-Highway Truck Engines {125H}
New Coolant Lines for Pump Electronic Tank Unit (PETU) are Now Used on Certain Off-Highway Trucks {108U, 1380} New Coolant Lines for Pump Electronic Tank Unit (PETU) are Now Used on Certain Off-Highway Trucks {108U, 1380}
A New Crankcase Breather Assembly Clamp is Now Used for Certain C175 Commercial Engines {1317} A New Crankcase Breather Assembly Clamp is Now Used for Certain C175 Commercial Engines {1317}
The Dosing Cabinet and Clean Emissions Module for the Retrofit Aftertreatment is Discontinued {108X} The Dosing Cabinet and Clean Emissions Module for the Retrofit Aftertreatment is Discontinued {108X}
Commissioning Procedure for 794 AC, 796 AC, and 798 AC Off-Highway Trucks is Updated {1000, 7000, 7961} Commissioning Procedure for 794 AC, 796 AC, and 798 AC Off-Highway Trucks is Updated {1000, 7000, 7961}
The Wiper Motor May Fail on Certain Next Generation Hydraulic Excavators {7305} The Wiper Motor May Fail on Certain Next Generation Hydraulic Excavators {7305}
140 Motor Grader Machine Systems Steering Accumulator - Remove and Install
New Improved Fuel Level Sensor Assembly is Now Used on Certain Generator Sets and Power Modules {1439, 7481} New Improved Fuel Level Sensor Assembly is Now Used on Certain Generator Sets and Power Modules {1439, 7481}
Box Handling and Storage of Cat® PVT 110 and PVT 110 ARC Photo Voltaic Module {1471} Box Handling and Storage of Cat® PVT 110 and PVT 110 ARC Photo Voltaic Module {1471}
Adding the Jacket Water Coolant Pressure Monitor to the Digital Control Unit {191W, 7451} Adding the Jacket Water Coolant Pressure Monitor to the Digital Control Unit {191W, 7451}
Troubleshooting Procedure is Now Available for Water In Liquid Level Sensor on Certain Excavators {7422} Troubleshooting Procedure is Now Available for Water In Liquid Level Sensor on Certain Excavators {7422}
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System General Calibration Information - Cat ET
A 337-2 Code Will Not Reset on Certain C32 and 3500 Generator Sets with ADEM III Electronic Control Modules {1901} A 337-2 Code Will Not Reset on Certain C32 and 3500 Generator Sets with ADEM III Electronic Control Modules {1901}