Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400} Caterpillar


Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}

Usage:

MT700 018
Caterpillar Products
All

Users will start to see Event Identification Number (EID)s above 60000. These EIDs above 60000 are intended for operational information notifications or operational change notifications intended for the operator. These EIDs are not intended to drive service. Service can ignore these EIDs. These EIDs will however show up in Cat® Electronic Technician (Cat ET) Service Tool, displays, Product Link, and everywhere else EIDs are displayed. Users may ignore any EIDs above 60000.

Caterpillar Information System:

313 and 313 GC Excavator Fuel Tank Shutoff and Drain Control
G3500H Generator Set Engine Nitrogen Oxide Level - Test
The 160-8178 Connecting Rod Pin End May Fail on Dealer Reconditioned or Reused Connecting Rods for Certain 3412 Engines {1225} The 160-8178 Connecting Rod Pin End May Fail on Dealer Reconditioned or Reused Connecting Rods for Certain 3412 Engines {1225}
G3500H Generator Set Engine Speed Control - Test
New Prelubrication Oil Pump Group is Now Used on Certain 3516 Engines {1319} New Prelubrication Oil Pump Group is Now Used on Certain 3516 Engines {1319}
Procedure for Paralleling XQ230 Generator Sets {4450, 4492, 7451} Procedure for Paralleling XQ230 Generator Sets {4450, 4492, 7451}
New Engine Software Is Used for Certain C9.3 Marine Engines {7432} New Engine Software Is Used for Certain C9.3 Marine Engines {7432}
Improved Rear Cover Assemblies and Air Filter Supports Are Now Used for Certain 3500 60 Hz Generator Sets {726A} Improved Rear Cover Assemblies and Air Filter Supports Are Now Used for Certain 3500 60 Hz Generator Sets {726A}
C7.1-XQ230 Rental Generator Set Engine Air Cleaner Element - Replace
C7.1-XQ230 Rental Generator Set Coolant Sample (Level 1) - Obtain
Updated Flywheel Housing is Now Used on Certain C7 Powered Engines {1156, 1157} Updated Flywheel Housing is Now Used on Certain C7 Powered Engines {1156, 1157}
New Software is Now Used for Certain 3508 Engines {1920, 7620} New Software is Now Used for Certain 3508 Engines {1920, 7620}
313 and 313 GC Excavator Fuel System Primary Filter (Water Separator) Element - Replace
313 and 313 GC Excavator Engine Oil and Filter - Change
PM620 and PM622 Cold Planer Maintenance Interval Schedule
A Tee with an Orifice is Now Used with the Left-Hand Simplex Fuel Lines on Certain C9.3 Marine Engines {1250, 1274} A Tee with an Orifice is Now Used with the Left-Hand Simplex Fuel Lines on Certain C9.3 Marine Engines {1250, 1274}
Oil Screens May Crack and Degrade on Certain C175 Commercial Engines {1151, 1162, 1206} Oil Screens May Crack and Degrade on Certain C175 Commercial Engines {1151, 1162, 1206}
New Engine Software for Certain C4.4 Machine Engines {7610, 7620} New Engine Software for Certain C4.4 Machine Engines {7610, 7620}
PM820, PM822, and PM825 Cold Planer Access Ladder Operation - Right Handrail Extend and Retract
New Bus Bar is Now Used on Certain 3516B HD Low-Voltage Generator Set Engines {4450, 445B} New Bus Bar is Now Used on Certain 3516B HD Low-Voltage Generator Set Engines {4450, 445B}
PM820, PM822, and PM825 Cold Planer Side Plate - Index Marks
The Fuel Injectors May Fail on Certain C7 and C9 Truck Engines {1251, 1254, 1290, 1713} The Fuel Injectors May Fail on Certain C7 and C9 Truck Engines {1251, 1254, 1290, 1713}
Procedure to Update Pump Electronic Tank Unit (PETU) Coolant Lines on Certain 797F and 793F Off-Highway Trucks {108H, 108J, 108K, 1091, 726A} Procedure to Update Pump Electronic Tank Unit (PETU) Coolant Lines on Certain 797F and 793F Off-Highway Trucks {108H, 108J, 108K, 1091, 726A}
Bolt Replacement Guidelines for Certain C175 20 cylinder Off-Highway Truck Engine Air System Support Components {0635, 1052} Bolt Replacement Guidelines for Certain C175 20 cylinder Off-Highway Truck Engine Air System Support Components {0635, 1052}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.