New Exhaust Spring is Now Used on Certain C18 Industrial Engines {1061}
- Generator Set
- C18 GEN SET (S/N: LXK1-2532)
- Industrial Engine
- C18 INDUSTRIAL (S/N: WJH1-81006; WRH1-11408)
Description Of Change: The new spring has improved robustness and durability for protection against vibrations.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
Show/hide table
Illustration 1 | g06369109 |
(1) (2) |
Spring (2) should be installed between the flowerpot and the couplers.
The use of 6 cable straps (1) to compress each spring (2) to
Table 1 contains the new part number for this change.
Show/hide table
New Part Number | New Part Name | Quantity |
---|---|---|
Spring | 2 | |
Cable Strap | 12 |
Caterpillar Information System:
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Swivel - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Remove
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Sprocket - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Front Idler and Recoil Spring - Remove
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Track Roller - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Track Carrier Roller - Remove and Install
Engine Replacement Procurement Instructions for Cat® Gaseous Generator Sets {1000} Engine Replacement Procurement Instructions for Cat® Gaseous Generator Sets {1000}
G3512 Generator Set Engine Engine Oil Cooler - Assemble
G3512 Generator Set Engine Engine Oil Cooler - Disassemble
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Hydraulic Track Adjusters - Remove
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Duo-Cone Conventional Seals - Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Travel on Level Ground - Test
797F and 797F XQ Off-Highway Trucks Machine Systems Electronic Control Module (VIMS Main Module) - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Pedal Control and Mounting - Remove and Installl
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000} A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Camera - Remove and Install
C175 Petroleum Engine Oil Filter Differential Pressure Problem - If Equipped with the Self-Cleaning Oil Filter
C175 Petroleum Engine Oil Pressure Is Low
C175 Petroleum Engine Sensor Supply - Test
140 Motor Grader Systems Piston Pump (All Wheel Drive)
Cleaning Guidelines for Cat® PVT110, PVT115, PVT117, and PVT120 PhotoVoltaic Module {0115} Cleaning Guidelines for Cat® PVT110, PVT115, PVT117, and PVT120 PhotoVoltaic Module {0115}
System Operating Voltage for Cat® PVT110, PVT115, PVT117, and PVT120 Photovoltaic Module {1471} System Operating Voltage for Cat® PVT110, PVT115, PVT117, and PVT120 Photovoltaic Module {1471}
Module Characterization Response of Certain Cat® PVT 110 and PVT 110 ARC Photovoltaic Modules to Partial Shading {1471} Module Characterization Response of Certain Cat® PVT 110 and PVT 110 ARC Photovoltaic Modules to Partial Shading {1471}