Swivel - Remove and Install
- Remove bolts (1).
Show/hide table
Illustration 2 g06360222 - Remove bolts (2).
Show/hide table
Illustration 3 g06360223 - If equipped open lid (3).
Show/hide table
Illustration 4 g06360225 - Reposition hose (4).
Show/hide table
Illustration 5 g06360230 - Remove bolts (5) and storage container (6).
Show/hide table
Illustration 6 g06360231 - Remove bolts (7) and panel (8).
Show/hide table
Illustration 7 g06360234 - Remove bolts (9) and panel (10).
Show/hide table
Illustration 8 g06360236 - Remove retaining rings (11).
- Disconnect lines (12).
Show/hide table
Illustration 9 g06360238 - Disconnect hose assemblies (13).
Show/hide table
Illustration 10 g06360241 - Disconnect hose assemblies (14).
Show/hide table
Illustration 11 g06360244 - Disconnect hose assemblies (15).
Show/hide table
Illustration 12 g06360248 - Disconnect hose assemblies (16).
Show/hide table
Illustration 13 g06360250 - Remove bolts (17) and swivel (17).
Show/hide table
| |
| Illustration 1 | g06360220 |
- Install the swivel (17) in reverse order of removal.
Caterpillar Information System:
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Remove
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Sprocket - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Front Idler and Recoil Spring - Remove
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Track Roller - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Track Carrier Roller - Remove and Install
Engine Replacement Procurement Instructions for Cat® Gaseous Generator Sets {1000} Engine Replacement Procurement Instructions for Cat® Gaseous Generator Sets {1000}
G3512 Generator Set Engine Engine Oil Cooler - Assemble
G3512 Generator Set Engine Engine Oil Cooler - Disassemble
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Hydraulic Track Adjusters - Remove
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Duo-Cone Conventional Seals - Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
New Exhaust Spring is Now Used on Certain C18 Industrial Engines {1061} New Exhaust Spring is Now Used on Certain C18 Industrial Engines {1061}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Travel on Level Ground - Test
797F and 797F XQ Off-Highway Trucks Machine Systems Electronic Control Module (VIMS Main Module) - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Pedal Control and Mounting - Remove and Installl
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000} A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Camera - Remove and Install
C175 Petroleum Engine Oil Filter Differential Pressure Problem - If Equipped with the Self-Cleaning Oil Filter
C175 Petroleum Engine Oil Pressure Is Low
C175 Petroleum Engine Sensor Supply - Test
140 Motor Grader Systems Piston Pump (All Wheel Drive)
Cleaning Guidelines for Cat® PVT110, PVT115, PVT117, and PVT120 PhotoVoltaic Module {0115} Cleaning Guidelines for Cat® PVT110, PVT115, PVT117, and PVT120 PhotoVoltaic Module {0115}
System Operating Voltage for Cat® PVT110, PVT115, PVT117, and PVT120 Photovoltaic Module {1471} System Operating Voltage for Cat® PVT110, PVT115, PVT117, and PVT120 Photovoltaic Module {1471}