- Articulated Truck
- 740 EJECTOR (S/N: 3F71-277)
- 740 GC (S/N: 3F81-55; 3T81-43)
- 745 (S/N: 3F61-1163; 3T61-552)
- 740 GC (S/N: 3F81-55; 3T81-43)
Description Of Change: An improved routing for the heater hose lines group is now available for the machines listed above. The new routing provides sufficient space for the heater line elbow between the cooler manifold and EGR cooler.
Adaptable To: The new routing is adaptable to the products within the listed serial numbers, and is effective with all products after the listed serial numbers.
Required Parts | ||||
---|---|---|---|---|
Item | Qty | New Part Number | Part Name | Former Part(1) |
1 | 1 | Hose | ||
2 | 1 | Clip | ||
3 | 1 | Adapter As | - |
(1) | The former part number listed is for reference only and may differ. |
Note: For 495-4895 Hose cut from bulk 415-6334 Hose.
Rework Procedure
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
- Reroute the new hose (1) to a spare port at the front of engine oil cooler and connect using elbow (B) and adapter (3), as shown in Illustration 1.
- Secure hose (1) using clip (2), as shown in Illustration 1.
- Use blanking plug (A) removed from front of the cooler to blank port at rear of cooler, shown in Illustration 1.
Illustration 1 | g06360929 |
(A) Blank plug
(B) (1) (2) (3) |