Procedure for Web Server Administrator Password on Certain Releases of VIMS 3G Software {7490, 7601, 7610, 7620} Caterpillar


Procedure for Web Server Administrator Password on Certain Releases of VIMS 3G Software {7490, 7601, 7610, 7620}

Usage:

770G ECX
Off-Highway Truck/Tractor
770G (S/N: RMA1-UP; KDH1-UP; ECX1-UP)
772G (S/N: TWB1-UP; RME1-UP; RMH1-UP; LTS1-UP; KEX1-UP; LTX1-UP)
777G (S/N: GT71-UP; T5A1-UP; TNM1-UP; RDR1-UP; T4Y1-UP)
793F (S/N: SND1-UP; SSP1-UP; SXP1-UP; RBT1-UP)
793F AC (S/N: EMD1-UP)
794 AC (S/N: MN51-UP; MT51-UP)
795F AC (S/N: ERM1-UP)
795FAC XQ (S/N: SNT1-UP)
797F (S/N: LAJ1-UP; WSP1-UP)
Quarry Truck
773G (S/N: MWH1-UP; JWS1-UP; T5S1-UP; T5T1-UP)
775G (S/N: T5F1-UP; RFM1-UP; MJS1-UP; T5W1-UP)

Introduction

Do not perform any procedure in this Special Instruction until you have read the information and you understand the information.

Requirements

The following items are necessary to perform the VIMS 3G configuration:

PC Requirements

  • Cat ET Version 2014C v1.0 or later

  • VIMSpc 2015A or later, Order part number: FERV0066, Dealer subscription code: JERD-2138

  • VIMSpc master database 15.2.9 or later

Refer to Special Instruction, REHS7337, ""VIMSpc" Update Release Information" for update instructions.

Equipment Requirements

The following items for equipment are required:

COM 2 adapter or COM 3 adapter:

  • 275-5121 Communication Adapter As (COM 2)

  • 370-8059 Adapter Kit (Optional COM 2)

  • 317-7485 Communication Adapter (COM 3)

Safety Section

------ WARNING! ------

Failure to follow all safety guidelines prescribed in this document and by governing authorities and regulatory agencies may result in severe injury or death of personnel or machine damage.


------ WARNING! ------

Climbing equipment may be required to access this service point. Refer to the Operation and Maintenance Manual, "Mounting and Dismounting" topic for safety information.


Do not perform any procedure in this Special Instruction until you have read this Special Instruction and you understand this information. Use only proper tools and observe all precautions that pertain to the use of those tools. The following procedures also should be observed.

Work safely. Most accidents that involve product operation, maintenance, and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs.

A person must be alert to potential hazards. This person should also have the necessary training, skills, and tools to perform these functions properly.

Safety precautions and warnings are provided in this instruction and on the product. If these hazard warnings are not heeded, bodily injury or death could occur to you or to other persons. Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard.

Therefore, the warnings in this publication and the warnings that are on the product are not all inclusive. Ensure that any tool, procedure, work method, or operating technique you use that is not recommended by Caterpillar is safe.

Ground the equipment. Improper grounding will result in electrical current paths that are uncontrolled and unreliable. Uncontrolled electrical circuit paths can result in damage to the equipment. Uncontrolled electrical circuit paths can also cause electrical activity that may degrade the electronics and communications. Ensure that all grounds are secure and free of corrosion.

------ WARNING! ------

Accidental engine starting can cause injury or death to personnel.

To prevent accidental engine starting, turn the ignition switch to the OFF position and place a do not operate tag at the ignition switch location.


Before starting this installation, in addition to the normal safety precautions taken whereas performing maintenance on heavy machinery, the following lockout/tagout procedure is recommended:

  1. Move the machine to a smooth, level location, and away from other working machines and personnel.

  2. Lower the implements to the ground.

  3. Stop the engine.

  4. Engage the parking brake for the machine.

  5. Place the disconnect switch in the OFF position.


    Illustration 1g06276183
    Lockout tags

  6. Place a lockout tag on the disconnect switch.

Procedure

These instructions apply for VIMS 3G software releases with part number 562-7343 Monitor Software Gp or later.

"Internet Protocol" Screen

To change to the "Web Server Administrator Password" in the "Internet Protocol" screen, perform the following procedure:

  1. Connect to the machine with the COM adapter.

  2. Open Caterpillar Electronic Technician (Cat® ET).


    Illustration 2g06342504
    ECM selection screen

  3. Select the "VIMS Main Module" ECM at the ECM selection screen and click the "OK" button. Refer to Illustration 2.


    Illustration 3g06342507
    Cat ET home screen

  4. Wait until the screen is populated with the list of ECMs on the machine. Refer to Illustration 3.


    Illustration 4g06342529
    Configuration tool button

  5. Click the Configuration Tool button. Refer to Illustration 4.


    Illustration 5g06342530
    "VIMS Main Module", "Internet Protocol" screen

  6. Under the "VIMS Main Module" ECM, select the "Internet Protocol" heading. Refer to Illustration 5.


    Illustration 6g06329670
    Changing the "Web Server Administrator Password"

  7. Open "Web Server Administrator Password" and change the default value to the new desired password. Refer to Illustration 6.


    Illustration 7g06331058
    "Change Parameter Value" screen

  8. Click "OK". Refer to Illustration 7. A pop-up will appear asking to confirm the change.


    Illustration 8g06333624
    Confirmation for change pop-up

  9. Click "Yes" to confirm the change. Refer to Illustration 8.

"Communicator" Tab

Perform the following procedure to access the "Communicator" tab:

  1. Connect the "VIMSpc" cable to the machine service port.


    Illustration 9g06342870
    VIMSpc application

  2. Start the VIMSpc application on the PC. Refer to Illustration 9.


    Illustration 10g06342871
    "Connect" button

  3. Use the "Connect" button to connect to the machine. Refer to Illustration 10.

  4. Select the "Status" button.


    Illustration 11g06333634
    "Communicator" tab

  5. Select the "Communicator" tab. Refer to Illustration 11.


    Illustration 12g06333650

  6. Click any sub menu item (except "Status"), for example "Auto File Download". Refer to Illustration 12.


    Illustration 13g06333676
    "Web Server Administrator Password"

  7. Enter the "Web Server Administrator Password" and click "Apply". Refer to Illustration 13.


    Illustration 14g06333707
    "Auto File Download" screen


    Illustration 15g06333711

  8. "Login Successful" message will be shown on successful attempts. Refer to Illustration 14.

    If entering a wrong password, a prompt will appear asking to check the password. Refer to Illustration 15.



    Illustration 16g06333712
    "Auto File Download" screen

  9. Once you have logged in, you will be able to change settings. Click "Auto File Download". The "Auto File Download" screen will appear. Refer to Illustration 16.

Caterpillar Information System:

24 Motor Graders Engine Supplement Engine Oil Pump - Remove and Install
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Ride Control Accumulator
New VIMS 3G Software is Now Available for Certain Trucks {7490, 7601, 7610, 7620} New VIMS 3G Software is Now Available for Certain Trucks {7490, 7601, 7610, 7620}
3516E Engine for Tier 4 Final 994K Wheel Loaders Air Cleaner and Precleaner
24 Motor Graders Engine Supplement Water Pump - Remove and Install
An Improved Transmission Planetary Is Now Used on Certain 700 Series Articulated Trucks {3030, 3160} An Improved Transmission Planetary Is Now Used on Certain 700 Series Articulated Trucks {3030, 3160}
An Improved Transmission Planetary Is Now Available on Certain 700 C-Series Articulated Trucks {3030, 3160} An Improved Transmission Planetary Is Now Available on Certain 700 C-Series Articulated Trucks {3030, 3160}
Improved Oil Cooler Core for the Radiator and Aftercooler Group Is Now Used on Certain 584 and 584HD Forwarders {1063, 1353, 1374, 1375} Improved Oil Cooler Core for the Radiator and Aftercooler Group Is Now Used on Certain 584 and 584HD Forwarders {1063, 1353, 1374, 1375}
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Toggle Switch (Ground Level Shutdown)
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Cooling Lines
Updated Hydraulic Lines Group with Correct Hydraulic Accumulators is Now Used on Certain 14M Motor Graders in Canada Region {5077} Updated Hydraulic Lines Group with Correct Hydraulic Accumulators is Now Used on Certain 14M Motor Graders in Canada Region {5077}
24 Motor Grader Systems Service Brakes - Test
S3015, S3025 and S3035 Demolition and Scrap Shears General Information
S3015, S3025 and S3035 Demolition and Scrap Shears Hydraulic System
S3015, S3025 and S3035 Demolition and Scrap Shears Swivel
S3015, S3025 and S3035 Demolition and Scrap Shears Control Manifold - Crossover Relief Valve
S3015, S3025 and S3035 Demolition and Scrap Shears Gerotor Motor
S3015, S3025 and S3035 Demolition and Scrap Shears Speed Control Valve
S3015, S3025 and S3035 Demolition and Scrap Shears Work Tool Preparation for Troubleshooting
980M Tier 4 and 982M Tier 4 Wheel Loaders Power Train Transmission Planetary - Assemble - Heavy Duty
New Front Suspension Mounting Hardware for 795F AC Off-Highway Trucks is Available {7200} New Front Suspension Mounting Hardware for 795F AC Off-Highway Trucks is Available {7200}
24 Motor Grader Machine Systems Blade Lift Cylinder - Remove and Install
C175 Tier 4 Final Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install
966M and 972M Wheel Loaders Fuel System Primary Filter (Water Separator) - Drain
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.