PM820, PM822, and PM825 Cold Planer Caterpillar


Prepare the Machine for Maintenance

Usage:

PM825 3C6

  • 將機器移動至乾燥、平坦且無任何碎屑的堅硬表面。

    附註地面必須堅硬到足以承受機器和所有用來支撐機器的機具之重量。

  • 使用推進操縱桿讓機器處於駐車狀態。 請參閱操作及維護手冊, "駕駛員控制"以瞭解更多資訊。

  • 將所有機器機具降至地面。 請參閱操作及保養手冊, "停止機器",以瞭解更多資訊。

  • 請確保在進行保養程序期間,所有會開啟的密閉式系統之壓力都已釋放。 請參閱操作及保養手冊, "系統壓力釋放",以瞭解更多資訊。

    引擎須運轉的保養作業

    對於需要引擎運轉的保養作業,請執行下列事項:

    1. 以怠速運轉引擎。

    引擎無須運轉的保養作業

    對於不需要引擎運轉的保養作業,請執行下列事項:

    1. 將引擎起動開關移至 OFF(關閉)位置。 請參閱操作及保養手冊, "停止引擎",以瞭解更多資訊。

    電力系統須停用的保養作業

    對於需要停用電氣系統的保養作業,請執行下列事項:

    1. 將引擎起動開關移至 OFF(關閉)位置。 請參閱操作及保養手冊, "停止引擎",以瞭解更多資訊。

    2. 將蓄電池斷路開關移至 OFF(關閉) 位置。 請參閱操作及保養手冊, "蓄電池斷路開關",以瞭解正確的程序。
  • Caterpillar Information System:

    797F Tier 4 Off-Highway Truck Engine Supplement Pressure Sensor (Exhaust Inlet) - Remove and Install
    New Brake Software is Now Available For Certain 794 AC and 795F AC Large Off-Highway Trucks {7490, 7610, 7620} New Brake Software is Now Available For Certain 794 AC and 795F AC Large Off-Highway Trucks {7490, 7610, 7620}
    Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490} Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
    320D3 Hydraulic Excavator Machine Systems Bucket Linkage Bearings and Seals - Install
    C18 Generator set and C18 Marine Engines Engine Oil Filter Base - Install - Remote Mount
    320D3 Hydraulic Excavator Machine Systems Bucket Linkage Bearings and Seals - Remove
    A New Fuel Return Tube Assembly and Mounting Hardware is Now Used on Certain C9.3 Marine Engines {1274} A New Fuel Return Tube Assembly and Mounting Hardware is Now Used on Certain C9.3 Marine Engines {1274}
    A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Engines {1403} A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Engines {1403}
    A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Machine Engines {1403} A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Machine Engines {1403}
    Outboard Bearing Removal Procedure for Integrated Throttle Body (ITB) on Certain 3500 Engines {1269} Outboard Bearing Removal Procedure for Integrated Throttle Body (ITB) on Certain 3500 Engines {1269}
    New Non-Contact Switch is Now Used on Certain 3500Engines {1078, 1408, 5736, 7400} New Non-Contact Switch is Now Used on Certain 3500Engines {1078, 1408, 5736, 7400}
    797F Tier 4 Off-Highway Truck Engine Supplement Temperature Sensor (Exhaust Inlet) - Remove and Install
    320 D3 Hydraulic Excavators Engine Disassembly and Assembly Crankcase Breather - Remove and Install
    C175 Tier 4 Final Engines for Caterpillar Built Machines Fuel and Auxiliary Water Pump Drive - Remove and Install
    C18 Generator set and C18 Marine Engines Engine Oil Filter Base - Install - Engine Mounted Oil Filtered Base
    320D3 Hydraulic Excavator Engine Supplements Exhaust Elbow - Remove and Install
    C18 Generator set and C18 Marine Engines Fuel Pressure Sensor - Remove and Install
    320D3 and 323D3 Excavators Machine System Specifications Final Drive
    G3512 EPA Emergency and Non-Emergency Standby Generator Sets Product Description
    C18 Generator set and C18 Marine Engines Coolant Temperature Sensor - Remove and Install
    303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Prepare the Machine for Maintenance
    C18 Generator set and C18 Marine Engines Electric Starting Motor - Remove and Install
    G3500H Generator Set Engine Restriction of Air Inlet and Exhaust
    C18 Generator set and C18 Marine Engines Electronic Control Module - Remove and Install
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.