A New Fuel Return Tube Assembly and Mounting Hardware is Now Used on Certain C9.3 Marine Engines {1274}
- Industrial Engine
- C9.3 (S/N: C931-317; CA91-214; CP91-224)
Description Of Change: The new fuel return tube assembly used with the new mounting hardware helps prevent fuel leaks caused by vibration and assembly stress.
Adaptable To:
Show/hide table
 |
|
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
- CA91-166
- CP91-160
- C931-245
Show/hide table
| Part Number | Part Name | Qty |
|---|---|---|
| Clip | 2 | |
| Clip | 2 | |
| Fuel Tube | 1 | |
| Hard Washer | 2 |
Show/hide table
| New Part Number | Part Name | Qty |
|---|---|---|
| Clip | 1 | |
| Clip | 1 | |
| Grommet | 1 | |
| Clip | 1 | |
| Clip | 1 | |
| Tube As | 1 | |
| Hard Washer | 1 | |
| Bolt | 1 |
Caterpillar Information System:
A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Engines {1403} A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Engines {1403}
A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Machine Engines {1403} A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Machine Engines {1403}
Outboard Bearing Removal Procedure for Integrated Throttle Body (ITB) on Certain 3500 Engines {1269} Outboard Bearing Removal Procedure for Integrated Throttle Body (ITB) on Certain 3500 Engines {1269}
New Non-Contact Switch is Now Used on Certain 3500Engines {1078, 1408, 5736, 7400} New Non-Contact Switch is Now Used on Certain 3500Engines {1078, 1408, 5736, 7400}
797F Tier 4 Off-Highway Truck Engine Supplement Temperature Sensor (Exhaust Inlet) - Remove and Install
C18 Generator set and C18 Marine Engines Engine Oil Filter Base - Remove - Remote Mount
320D3 Hydraulic Excavator Machine Systems Duo-Cone Conventional Seals - Install
PM820, PM822, and PM825 Cold Planer Conveyor Belt Tension and Tracking - Adjust
320D3 Hydraulic Excavator Machine Systems Pump Drive Coupling - Remove and Install
C18 Generator set and C18 Marine Engines Fuel Manifold - Install
C175-16 Marine Engines Oil Mist Detector - Clean
320 D3 Hydraulic Excavators Engine Disassembly and Assembly Crankshaft Front Seal - Remove and Install
320D3 Hydraulic Excavator Machine Systems Bucket Linkage Bearings and Seals - Remove
C18 Generator set and C18 Marine Engines Engine Oil Filter Base - Install - Remote Mount
320D3 Hydraulic Excavator Machine Systems Bucket Linkage Bearings and Seals - Install
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490} Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
New Brake Software is Now Available For Certain 794 AC and 795F AC Large Off-Highway Trucks {7490, 7610, 7620} New Brake Software is Now Available For Certain 794 AC and 795F AC Large Off-Highway Trucks {7490, 7610, 7620}
797F Tier 4 Off-Highway Truck Engine Supplement Pressure Sensor (Exhaust Inlet) - Remove and Install
PM820, PM822, and PM825 Cold Planer Prepare the Machine for Maintenance
320 D3 Hydraulic Excavators Engine Disassembly and Assembly Crankcase Breather - Remove and Install
C175 Tier 4 Final Engines for Caterpillar Built Machines Fuel and Auxiliary Water Pump Drive - Remove and Install
C18 Generator set and C18 Marine Engines Engine Oil Filter Base - Install - Engine Mounted Oil Filtered Base
320D3 Hydraulic Excavator Engine Supplements Exhaust Elbow - Remove and Install
C18 Generator set and C18 Marine Engines Fuel Pressure Sensor - Remove and Install