C175 Tier 4 Final Engines for Caterpillar Built Machines Caterpillar


Electronic Control (Diesel Exhaust Fluid) - Remove and Install

Usage:

793F D3T

Removal Procedure


NOTICE

Keep all parts free from contaminants. Contaminants may cause rapid wear and shortened component life.


Note: Repeat the procedure for each electronic control.



    Illustration 1g06261556

  1. Remove bolts (1) and cover (2).


    Illustration 2g06261707

  2. Remove two locks (4) and disconnect harness (5).

  3. Remove bolts (3) to remove electronic control (6).

Installation Procedure

  1. Install electronic control (6) in the reverse order of removal.

    1. Tighten bolts (3) to a torque of 10 ± 2 N·m (89 ± 18 lb in).

Caterpillar Information System:

301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Cab Heater - Remove and Install
PM820, PM822, and PM825 Cold Planer Air Pressure Regulator
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement System Pressure - Release
320D3 Excavators Bucket Tips - Inspect/Replace
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Seat - Remove and Install
320D3 Excavators Bucket Tips - Inspect/Replace - Drive-through System
320D3 and 323D3 Excavators Systems Travel Hydraulic System
320D3 Hydraulic Excavator Machine Systems Stick Cylinder - Assemble
320D3 and 323D3 Excavators Systems Oil Makeup (Swing System)
320D3 and 323D3 Excavators Systems Relief Valve (Swing)
New Panel Groups are Now Used on Certain XQ35 and XQ60 Generator Sets {4490, 7490} New Panel Groups are Now Used on Certain XQ35 and XQ60 Generator Sets {4490, 7490}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202} New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
C175 Tier 4 Final Engines for Caterpillar Built Machines Solenoid Valve (DEF Heater Coolant) - Remove and Install
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Cab - Remove and Install
320D3 Hydraulic Excavator Machine Systems Boom Cylinder - Disassemble
320D3 Excavators Condenser (Refrigerant) - Clean
C9.3 Marine Engine Radiator Core - Remove and Install - Jacket Water Radiator Core
320D3 and 323D3 Excavators Systems Pilot Hydraulic System
320D3 Hydraulic Excavator Machine Systems Boom Cylinder - Assemble
320D3 and 323D3 Excavators Systems Pilot Valve (Joystick)
323D3 Hydraulic Excavators Engine Supplements Electric Starting Motor - Remove and Install
323D3 Hydraulic Excavators Engine Supplements Engine - Remove and Install
323D3 Excavators Engine Oil Sample - Obtain
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Counterweight - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.