| |
| Illustration 1 | g06332778 |
|
(1) Outlet to Tank
(2) Pilot pressure outlet (3) Implement and steering supply (4) Pump inlet (5) Main relief valve (6) Pressure reducing valve (7) Secondary steering pressure sensor port (8) Pump pressure test port (9) Pump pressure sensor port | |
The control manifold contains the main system relief valve (5), the primary pilot pressure reducing valve (5), and one pressure test ports. Pressure test port (8) will indicate the oil pressure from the piston pump for the implement and steering.
The control manifold contains a pressure reducing valve (6). The pressure reducing valve regulates the pressure for the pilot system for the implements and steering.
Reference: For information on the pilot pressure settings, refer to Testing and Adjusting, "Hydraulic System Pressure - Test and Adjust".
The control manifold contains a relief valve (5) that will protect the system from a sudden rise in pressure. Relief valve (5) will limit the peak pressure in the circuit.
Reference: For more information on the relief valve settings, refer to Testing and Adjusting, "Hydraulic System Pressure - Test and Adjust".
Operation of the Control Manifold
| |
| Illustration 2 | g06332888 |
|
(1) Outlet to Tank
(2) Pump Outlet (3) Pump Inlet (4) Relief valve (5) Pressure reducing valve (6) Pressure test port for implement and steering pump | |
Oil enters the manifold at port (3). Oil will flow from port (3) to pump pressure test port (6), pressure reducing valve (5), and relief valve (4). When the pressure is too high, relief valve (4) will open. The oil will be sent back to the hydraulic tank through port (1). Pressure reducing valve (5) will close when the pilot circuit is up to operating pressure.
Reference: For information on the pressure settings of the control manifold, refer to Testing and Adjusting, "Hydraulic System Pressure - Test and Adjust".