An Improved Stub Shaft is now Used for the CX38 Transmission in Certain 700 Series Articulated Trucks {3063, 3160} Caterpillar


An Improved Stub Shaft is now Used for the CX38 Transmission in Certain 700 Series Articulated Trucks {3063, 3160}

Usage:

745 3F6
Articulated Truck
735C (S/N: JE61-UP; JE71-UP; LFJ1-UP; TFJ1-UP)
740 EJECTOR (S/N: 3T71-165)
740 GC (S/N: 3F81-UP; 3T81-UP)
740C EJECTOR (S/N: LFN1-UP; TFN1-UP)
745 (S/N: 3F61-653; 3T61-610)
745C (S/N: JE81-UP; JE91-UP; LFK1-UP; TFK1-UP)

Description Of Change:

Reference: Refer to Disassembly and Assembly, Transmission Planetary - Disassemble and Transmission Planetary - Assemble for transmission disassembly and assembly instructions.

An improved stub shaft is now used for the CX38 Transmission in Certain 700 Series Articulated Trucks. The new stub shaft has improved heat treat to withstand higher torque spikes.

Adaptable To: The improved 553-7191 Shaft replaces 471-9315 Shaft and is adaptable to the products within the listed serial numbers and is effective with all products after the listed serial numbers.

Table 1
Required Parts 
Qty  New Part
Number 
Part Name  Former Part
Number (1)(2) 
553-7191  Shaft  471-9315 
(1) The former part number listed is for reference only and may differ.
(2) Part number 471-9315 with Engineering Change number of 01 or has a supplier serial number equal to or greater than M446100 has all engineering updates and can still be used.


Illustration 1g06320355
(1) Engineering change number location

Caterpillar Information System:

New Software Updates are Now Available for Certain 773E and 777E Off-Highway Trucks {7490, 7610, 7620} New Software Updates are Now Available for Certain 773E and 777E Off-Highway Trucks {7490, 7610, 7620}
PM820, PM822, and PM825 Cold Planer Fuel System Primary Filter (Water Separator) Element - Replace
PM820, PM822, and PM825 Cold Planer Fuel System Secondary Filter - Replace
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Hydraulic Cylinder
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Hydraulic Cylinder
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Multi-Processor Hydraulic System
New Procedure for Power Cycle is Now Available for Certain Cat® Product Link (PL131) Devices {7606} New Procedure for Power Cycle is Now Available for Certain Cat® Product Link (PL131) Devices {7606}
Improved Product Link On-Board Software is Now Available for All Cat® Products {7606} Improved Product Link On-Board Software is Now Available for All Cat® Products {7606}
An Improved Rear Wheel Bearing for Certain Large Off-Highway Trucks is Available {4008, 7551} An Improved Rear Wheel Bearing for Certain Large Off-Highway Trucks is Available {4008, 7551}
The Housing Assembly for the Front Suspension Group May Crack on Certain 773G and 775G Off-Highway Trucks {7200, 7201} The Housing Assembly for the Front Suspension Group May Crack on Certain 773G and 775G Off-Highway Trucks {7200, 7201}
The Pressure Setting on the Hoist Raise Valve Group May Be Low on Certain Off-Highway Trucks {5051, 5069, 5117} The Pressure Setting on the Hoist Raise Valve Group May Be Low on Certain Off-Highway Trucks {5051, 5069, 5117}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202} New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Hydraulic Oil Cooler - Lines
PM820, PM822, and PM825 Cold Planer Air Pressure Regulator
PM820, PM822, and PM825 Cold Planer Engine Crankcase Breather - Clean
24 Motor Grader Systems Piston Pump (Implement)
994K Wheel Loader Engine Supplement Nitrogen Oxide Sensor - Remove and Install - Inlet Nitrogen Oxide Sensor 1
24 Motor Grader Systems Pump Control Operation
24 Motor Grader Systems Control Manifold (Implements)
24 Motor Grader Systems Shutoff Valve
C175 Tier 4 Final Engines for Caterpillar Built Machines Electronic Control (Diesel Exhaust Fluid) - Remove and Install
24 Motor Grader Systems Blade Cushion
785C Off-Highway Trucks Equipped with Dynamic Gas Blending (DGB) Engine Components - Rebuild/Install Reman
785C Off-Highway Trucks Equipped with Dynamic Gas Blending (DGB) Engine Components - Clean/Inspect, Rebuild/Install Reman, Install New
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.