Improved Product Link On-Board Software is Now Available for All Cat® Products {7606}
- Machine Control and Guidance Products
- PRODUCT LINK (S/N: PL61-UP)
Reference: Special Instruction, REHS9131, "Release Notes for Cat ® Product Link PL131, PL141, PL161, PL240, PL241, PL542, PLE601, PLE640, PLE641, PLE631, PL641, PL631, and PLE702 Systems".
Improved Product Link On-Board software is now available for all Cat machines. The new 2018.1 release contains the changes and improvements listed in the above mentioned Special Instruction.
Caterpillar Information System:
An Improved Rear Wheel Bearing for Certain Large Off-Highway Trucks is Available {4008, 7551} An Improved Rear Wheel Bearing for Certain Large Off-Highway Trucks is Available {4008, 7551}
The Housing Assembly for the Front Suspension Group May Crack on Certain 773G and 775G Off-Highway Trucks {7200, 7201} The Housing Assembly for the Front Suspension Group May Crack on Certain 773G and 775G Off-Highway Trucks {7200, 7201}
The Pressure Setting on the Hoist Raise Valve Group May Be Low on Certain Off-Highway Trucks {5051, 5069, 5117} The Pressure Setting on the Hoist Raise Valve Group May Be Low on Certain Off-Highway Trucks {5051, 5069, 5117}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202} New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202} New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
Improved Engine Software and Diesel Exhaust Fluid Injector Assembly Is Now Used on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {108I, 7610, 7620} Improved Engine Software and Diesel Exhaust Fluid Injector Assembly Is Now Used on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {108I, 7610, 7620}
AP655F and AP655F L Asphalt Paver Declaration of Conformity
CB64B, CB66B and CB68B Asphalt Compactors Machine Electronic Control System Machine Steer not Responding Properly
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Intake Manifold Air Temperature Is High
3516E Engines for Caterpillar Built Machines Vibration Damper - Remove and Install
563D and 573D Wheel Feller Buncher Windows - Clean
Product Link ® Elite PLE742 Systems Service Tools
New Procedure for Power Cycle is Now Available for Certain Cat® Product Link (PL131) Devices {7606} New Procedure for Power Cycle is Now Available for Certain Cat® Product Link (PL131) Devices {7606}
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Multi-Processor Hydraulic System
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Hydraulic Cylinder
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Hydraulic Cylinder
PM820, PM822, and PM825 Cold Planer Fuel System Secondary Filter - Replace
PM820, PM822, and PM825 Cold Planer Fuel System Primary Filter (Water Separator) Element - Replace
New Software Updates are Now Available for Certain 773E and 777E Off-Highway Trucks {7490, 7610, 7620} New Software Updates are Now Available for Certain 773E and 777E Off-Highway Trucks {7490, 7610, 7620}
An Improved Stub Shaft is now Used for the CX38 Transmission in Certain 700 Series Articulated Trucks {3063, 3160} An Improved Stub Shaft is now Used for the CX38 Transmission in Certain 700 Series Articulated Trucks {3063, 3160}
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Hydraulic Oil Cooler - Lines
PM820, PM822, and PM825 Cold Planer Air Pressure Regulator
PM820, PM822, and PM825 Cold Planer Engine Crankcase Breather - Clean
24 Motor Grader Systems Piston Pump (Implement)